Gravity cell phone holder for the car

I adapted and improved Jolumoar's model (who had taken it from Raulrojas), which I combined with Danzig483's fixation model.

This adaptation is therefore based on the following models:

https://cults3d.com/en/3d-model/gadget/soporte-de-celular-para-coche

https://cults3d.com/en/3d-model/tool/car-phone-holder-dock

The main changes are as follows:

Improved gravity phone holder ("soporte de celular para coche"):

• Reduction of the various clearances by adding guides and increasing the diameters of the internal lever supports.

• Removal of 3D printed screws and nuts, adaptation of the indentations and screw passages (M4 type - see below).

• Modification of the fastener in order to adapt it to the gopro type fastening system.

Modification of the attachment system to the ventilation grid ("car phone holder dock") :

• Modification, centering and 90° rotation of the gopro-type mounting bracket

• It should also be possible to use the original part (integrated into the package, file named "Carholder8v9") to attach it directly to the holder.

Requires additional :

For the realization of the gravity phone holder :

• 2 screws M4x10

• 2 M4 nuts (max width: 7 mm)

• 2 washers for M4 screws (max outer diameter: 9 mm)

For fasteners:

• A 90° gopro mount, which you can find here :

https://cults3d.com/en/3d-model/gadget/90-degree-gopro-mount

• 2 screws for gopro support (or equivalent screws)

• 2 mounting nuts for gopro bracket (or equivalent nuts)

Other fixings by embedding in the pocket space (the most efficient solution) :

https://cults3d.com/en/3d-model/various/support-de-fixation-encastre-pour-peugeot-5008-1er-generation

Other fixings on grid :

https://cults3d.com/en/3d-model/gadget/fixations-sur-grille-de-ventilation-de-voiture-pour-support-de-telephone-portable-bemore

I printed it in PETG on a Genius printer with a 20% fill percentage.