Electric guitar Wall hanger - Demon Claws

**English **English **English **English **English **English **English **English **English

This model is a guitar stand that supports the guitar from the sides, taking advantage of the shape that most electric guitars have.

In addition to the support blocks, the model has sliding latches, with demon claws, that after installation will look like they are gripping the guitar. Inside one of the blocks I put a storage for the pick.

The idea comes from the need, from a friend of mine, to hang his guitar, and from my passion for making designs different from others.

English

This model is a wall hanger for guitar which holds it by its sides, taking advantage of most of electric guitars shapes.

Besides having support blocks, the model has sliding locks at both sides, with two demon claws. After installing it looks like they are grabbing the guitar. Inside one of the blocks I put a pick saver.

The idea comes out from a friends need, of hanging his guitar, and my passion for designing in different ways.

Recommendations

support blocks:

infill 75% works good

.3 mm layer height maximum

use supports for the upper part . I print the model with Z distance .34 and X/Y distance .7.

claw locks

infill 25% works good

.3 mm layer height looks good

be careful with the supports. I print the model with Z distance .34 and X/Y distance .7.

everything is printed with its flat part down.

I use standard Wall bolts 4 mm diameter.