These models represent the Landrover Series III long wheelbase variant in both Hard and Soft Top configurations. This variant was most famously used in the 1980s during the Falklands War, before gradually being phased out in favour of the “110” and “90” by the 1990s. That being said, these models could pass for a Series II, 90, or 110 as well.
Included are both hard and soft top variants. Each variant has separate wheels for highest quality printing. Please note that there is a subtle difference between the spare wheel and the regular wheels.
These models are optimised for detail at 1/100 or 15mm scale, but they should scale up well too.
Printed model dimensions (approx.):
L 46 W 20 H 17
Models painted by Julian West.
Printer settings used for display models:
- Anycubic Photon Mono
- Translucent Green Anycubic Resin
- 0.03mm layer height
- 1.4s exposure time
- 24s bottom exposure time
- 5 bottom layers
- lift speed: 1mm/s
- 8x Antialiasing
Slicer used:
- Photon Workshop V2.1.23.RC8
Reviews
There are no reviews yet.