League of Legends: Arcane - Ekko stopwatch

This model is separated into five parts, top, mid, bot, hand long and hand short. Please refer to the attached preview for the parts' name.

I had come out with multiple designs and found that this will be the best for easy printing. This model is design based on the concept I used in Christmas Ornaments.

Since there is quite a number of small components, I had retained most edges without bevel so that you can have some threshold when doing the sanding process.

Once printed out, glue the top, mid and bot parts together and hook on the hand and adjust them to your preference.

If you plan to swing it like Ekko in the show, you can add a chain to the extruded parts on the top of the watch. It can be done by drilling a small hole on it and attach a keychain ring on it. Then attach to a tiny chain.

This model have some hanging part where support is required in the mid part. While, for the other parts, there will be free from using support. But I still recommend a brim for a better printing bed adhesive.

If you want to do scaling for the parts, remember to apply the same factor to all the parts. I design it to be around 10cm in diameter base on my hand and Ekko's hand as reference.

I also include a uncut version for you if you want to cut it yourself, or want to print it in one piece which I believe you won't want to as removing supports from such a small prop will be so hassle.

Cheers and happy printing!

Dimension: 134.20mm x 100mm x 35.93mmm