Xiaomi Xiaomi Scooter Stand - Home Collection

Resolute support for flashing indicator lights (see light announcement: https://es.aliexpress.com/item/1005001426464286.html?spm=a2g0o.9042311.0.0.249563c03wIrlq) compatible with the popular Xiaomi electric scooter. This bracket allows a perfect combination of this set of lights in the place where, as standard, the license plate is installed.

Allows easy removal of the lights for handling or cleaning of dirt from the area without having to carry out more complex steps.

The installation of the bracket is simple:

1) We first remove the rear fender (see process video: https://youtu.be/DVGLIDEldbo) leaving the screw holes free for the new addition.

2) Then we can install the new bracket making use of two M3x15 bolts and two M3 nuts.

The bracket that will be in direct contact with the scooter has a recess designed to accommodate the head of the screws, it is recommended that the nut is installed on the inside of the fender. In this way, once the whole assembly has been reassembled we can change the bracket part without having to remove the whole fender assembly again.

When you make this purchase you receive the following:

• Buckle-bracket part that will be in direct contact with the scooter.

• Hitch piece designed to be coupled with the turn signals.

⫷ Recommended Main Parameters ⫸

⌦ Material (PETG Recommended).

↳ Layer Height: 0.2 - 0.25 (mm)

↳ Wall Thickness: 3 times extruder thickness.

↳ Ceiling thickness: 3 times layer height.

↳ Filling: 100%.

⌦ Speeds.

↳ Printing: 30 (mm/s)

↳ Filling: 30 (mm/s)

Wall: 25 (mm/s)

Displacement: 100 (mm/s)

↳ Initial layer: 20 - 25 (mm/s)

⌦ Ventilation

↳ Enabled: Yes.

↳ Power: 60%.

⌦ Conventional brackets

↳ Enabled: Yes.

↳ Type: On the printing surface.