243310A Mil Mi-14PL

The Mil Mi-14 (product "140", machine B-14, NATO codification: Haze - "Fog") is a Soviet shore-based multipurpose amphibious helicopter. The new design (with the internal designation B-14) differed from the Mi-8 in having a boat-like hull similar to the Sea King, allowing it to operate off the water, and a retractable four-point undercarriage, with the main wheels retracting into large sponsons on the rear of the fuselage. The helicopter was to be powered by two Klimov TV3-117MT turboshaft engines. A watertight weapons bay is fitted to the centerline of the fuselage allowing internal carriage of a single torpedo or eight depth charges, while a radome housing a search radar is fitted beneath the nose.

A detailed 3D printable model of Mi-14PL in 1/48 scale. Model with cabin interior, designation of doors, windows, air intakes and many separate parts.

Model code: 243310A Model kit Mil Mi-14PL
Scale: 1/48
Engines: TV3-117MT
Landing gear: up/down
Fuselage length: 385.7 mm
Full length: 527.5 mm
Diameter of the main rotor: 443.5 mm
Parts quantity: 78
3D print complexity: 4/5
Assembly complexity: 4/5
Decals: none

It is possible to assemble model with open/close door and windows, variable tilt angle of main rotor, rotating wheels, main and anti-torque rotors. The model is not motorized! The model requires gluing. 3D Printing Guidelines and Assembly Instructions are included.

The model is optimized for a 0.4 mm nozzle and 0.15 mm layers. Approximate ⌀1.75 mm filament length for one model (without stand) - 67 meters.

Files format: .stl

Dimensions of the largest parts (in mm):
Fuselage Mi14PL Center: 69.7 x 83.6 x 112.5
Fuselage Mi14PL Tail: 69.7 x 98.2 x 224.5
Main rotor Blade: 12.9 x 210.9 x 2.9
Stand B Part 2: 100.0 x 144.0 x 130.0

All parts were tested on a 3D printer Anycubic Chiron. The manual includes information about supports and printing recommendations