Kiss me v2

Another lightly sexy figurine for another study on drapery. 

Can be a beautiful paper weight if you carve the base to put some weight (like gluing steel ball or pieces of lead).

original scale size (mm): 

Length= 91.82 Witdh= 96.38 height= 120

model print tested with this parameters: 

0.4mm nozzle, ABS 1.75mm 0.2mm layer, 2 perimeters, 10% infill 

Beware of the big base if your first layer is not properly calibrated, use a brim to prevent warping/unsticking.

special note: truly Optimized for FDM printers - No support Needed.