Not A Flamethrower | Boring Company

3D model of a tactical housing for liquid propane gas burner, weed killer, Not a Flamethrower.

The 3D model consists of 8 parts and has an overall size of 66x25x8 cm. The largest part has a length of 450mm and can be printed diagonally on a 400x400x400 print bed. The model is freely scalable, so it can be printed for example in a size of 50% of the original size, or even smaller.

When you buy the 3D model, you get a total of 8 individual parts:

• Barrel
• upper side of the stock
• lower side of the stock
• Handle
• foregrip
• Bottle holder
• Decorative holder
• Burner model

If you have printed the 3D model with a 3D printer and want to finish it to a Flamethrower, you need a 50cm long gas burner. This is operated with standard 7/16 inch CFH pressurized gas cans, which can be found inexpensively in any hardware store.

The flame can be adjusted by a valve (black color) and the gas supply by another valve (blue color).

Other important details for the completion of the "weed killer":

• High quality gas burner with ø 50 mm nozzle.

• 50 cm distance between handle and flame nozzle

• Perfectly suitable for standard CFH pressurized gas cans

• Valve from 7/16 to 3/8

The 3D files are under copyright - protection and may not be distributed or sold.

DISCLAIMER WARNING: THIS ITEM IS NOT A TOY.
Purchase and operation of this blowtorch is at your own risk. By purchasing this blowtorch, NotAFlameshop cannot be held liable for any injury or damage. By purchasing this propane torch, the purchaser agrees that NotAFlameshop will not be held liable for any injury, death or loss of property.

NotAFlameshop is in no way affiliated with "The BORING Company".

object size: 660x250x80mm.

3D file format: 3MF and STL
Publication date: 2020/05/17