Modular Hex Tabletop Terrain

This hex shaped terrain is designed to be used at table top gaming terrain. The terrain can be placed in your world or you can use binder clips to attach all the sections together.

Checkout the "Layout Examples" if you would like to just print what you need for your gaming table.

You can print these terrain sections with or without the hex shape on the top.

Update 1.

• I updated the models to be upside down for easier printing. *Plus much cheaper if you use a 3d party print service.

Update 2.

• Added a step model that can be added to the existing corner model.

Tips:

• Models labeled with an R/L are split parts. These are designed to fit on smaller printer beds. You can't mix and match R/L parts, and you'll be unable to use just one of the R/L parts. They are designed to be used as a single section.
• "StepLower" & "StepUpper" are the 2 parts needed to create the STEP terrain section. You can leave them as 2 parts or glue them together. But You need to print both sections.
• The "PieCenter" is tricky. If you want a large terrain area, you need print 6 of them! Since this is based on the hex grid system and our grid layout is locked down. That was the only way to make a large flat section work, by having a large hexagon, which is broken up into 6 parts.