Jurassic Park Cryocanister v4 (BadWolfProps) Remix

This is a remix of BadWolfProps (https://www.thingiverse.com/thing:2430756)' fantastic Functional Cryocan Replica Prop. All credit goes to him, as I did not design this prop, I merely remixed it to achieve specific results:

1. The channel for the O-Ring on the base part wasn't wide enough to accomodate the specific type that I am using (I will add a part number here later).
2. The actual screen-used prop had the 'CO2' canister part of the prop extend all the way, or at least much further down the prop, as in it's 'stored' state, no top seam is visible. I tried to reproduce this as best I could.

To print this prop properly you will need to download BadWolfProp's version 4 cryocan (https://www.thingiverse.com/thing:2430756) first, and replace three files with mine:

jp_canister_functional_v4_top_cylinder_lengthened (my modified version)
replaces
jp_canister_functional_v4_top_cylinder (badwolfprops original)

jp_canister_functional_v4_base_biggeroring (my modified version)
replaces
jp_canister_functional_v4_base (badwolfprops original)

and

jp_canister_functional_v4_1_tall_cylinder_shortened (my modified version)
replaces
jp_canister_functional_v4_1_tall_cylinder (badwolfprops original)

I will not repost the other files here, in an effort to make sure that any attention to this prop requires BadWolfProps' files, and thusly drives traffic back to his work.

In the event that BadWolfProps would like this removed, I will happily do so.

-