Barbell Lifter / Barbell Jack / Lifter / Bar Jack

DESIGN SUBJECT COPYRIGHT PROTECTION, the design is sold for your personal use, any kind of sale of the product without my consent

Barbell lifter to optimize the loading and unloading of the Olympic bar when on the ground (deadlift, rowing,...).

Its design makes it compatible with Olympic discs (up to 450mm in diameter) and Olympic bars up to 30.1mm in diameter.

It is designed to be printed with printing dimensions from 220x220 (included), divided into three parts so you can customize with the colors you like.

The design is made according to the tolerances, but it is advisable to make sure that the printer is well calibrated.

If you like my work you can support on my profile with donations and follow me on my social networks.

This design is under copyright as a registered model, therefore any kind of sale using this design without my consent is considered a violation of copyright and copyrights.

Barbell liftter to optimize the loading and unloading of the Olympic bar when it is on the ground (deadlift, row, ...)

Its design makes it compatible with Olympic discs (up to 450mm in diameter) and Olympic bars up to 30.1mm in diameter.

It is designed to be printed with printing dimensions starting at 220x220 (included), divided into three parts to be able to customize with the colors that you like the most.

The layout is done to tolerances, but make sure the printer is properly calibrated.

If you like my work you can support me in my profile with donations and follow on my social networks.

Can be printed and used with PLA

1º Make sure that the machine is properly calibrated and the flow rate is set correctly

2º Print the parts in the orientation they come in for greater mechanical strength.

Layer height: It doesn't matter

Filling: at least 20% of the layer

Perimeter: use at least 3 walls

Supports: -Everywhere (No supports needed at the foot part)

    -Support Z-distance: 0.2 (0.4 nozzle)


    -Support interface density: 33.333

3D PRINTING SETTINGS

Could be printed and used with PLA

1º Be sure to have the machine well calibrated and the flow rate adjusted

2ºPrint in the orientation the pieces are for better mechanical resistance.

Layer Height: What you want

Infill: at least 20%

Perimeter: use at least 3 walls

Supports:-Everywhere (No supports needed on foot part)

-Support Z Distance: 0.2 (0.4 nozzle)


-Support Interface Density: 33.333