Batibase / Batiholder

Batibase

While I was making another design with the Batman logo, it occurred to me to transform it into a cell phone base. At first it was going to be fixed, but in the end it came out as a foldable mobile design, which can also be used as a keychain if you want. For that I leave the two designs.

It's something eye-catching, original, and useful at the same time. And if that's not enough, it's from Batman ! :P

Enjoy!

Español

Batiholder

While I was making another design with the Batman logo, it occurred to me to transform it into a cell phone stand. First it was going to be fixed, but in the end this folding mobile design came out, which can also be used as a keychain if you want. For that I leave the two designs.

It is something eye-catching, original, and useful at the same time. And if that's not enough, it's from ** Batman **! : P

Enjoy it!

Print settings

Printer: Tronxy XY 2

Layer height: 0.2

Rafts: No

Supports: Not required

Backfill: 10% Filling: 10% Filling: 10% Filling: 10% Filling: 10% Filling: 10% Filling: 10%

Filament brand: GST3D

Filament color: Copper/Gold/Black

Filament material: PLA

Notes:

For better strength in the areas with holes, I set the infill to 50% in those parts. You could also use 50% infill in general, since it's not that big of a piece.

Print Settings

Printer: Tronxy XY 2

Layer Height: 0.2

Rafts: No

Supports: No need

Fill: 10%

Filament brand: GST3D

Filament Color: Copper / Gold / Black

Filament material: PLA

Notes:

For better resistance in the areas with holes, I set the infill to 50% in those parts. A 50% infill could also be used in general, as it is not that big of a piece.