Skip to content

Vought F4U-1D Corsair

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (3 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 10.5k views
  • 15 likes
  • 56 downloads
License
3D design format
1 file (ZIP) Close
  • VOUGHT F4U-1D CORSAIR.zip
    • Bonus helpful parts/1mm wire lock/fff/push rod lock 1mm.factory
    • Bonus helpful parts/1mm wire lock/G-CODE/1mm wire stop clamp A + B.gcode
    • Bonus helpful parts/1mm wire lock/stl/1mm wire stop clamp A .stl
    • Bonus helpful parts/1mm wire lock/stl/1mm wire stop clamp B.stl
    • Bonus helpful parts/CoG balancer/FFF/balancer long arm version.factory
    • Bonus helpful parts/CoG balancer/FFF/balancer shot arm (600mm model) version.factory
    • Bonus helpful parts/CoG balancer/G-CODE/balancer long arm version.gcode
    • Bonus helpful parts/CoG balancer/G-CODE/balancer shot arm (600mm model) version.gcode
    • Bonus helpful parts/CoG balancer/STL/arm.stl
    • Bonus helpful parts/CoG balancer/STL/base plate.stl
    • Bonus helpful parts/CoG balancer/STL/long arm.stl
    • Bonus helpful parts/m5 nut + wrench/fff/m5 nut REVERSED.factory
    • Bonus helpful parts/m5 nut + wrench/fff/m5 nut wrench fff.factory
    • Bonus helpful parts/m5 nut + wrench/fff/m5 nut.factory
    • Bonus helpful parts/m5 nut + wrench/g-code/m5 nut REVERSED.gcode
    • Bonus helpful parts/m5 nut + wrench/g-code/m5 nut wrench.gcode
    • Bonus helpful parts/m5 nut + wrench/g-code/m5 nut.gcode
    • Bonus helpful parts/m5 nut + wrench/stl/m5 nut REVERSED .stl
    • Bonus helpful parts/m5 nut + wrench/stl/m5 nut wrench stl.stl
    • Bonus helpful parts/m5 nut + wrench/stl/m5 nut.stl
    • Cura profiles/COLORFABB LW-PLA.curaprofile
    • Cura profiles/REGULAR PLA.curaprofile
    • Cura settings.pdf
    • F4U-1D CORSAIR/FFF/AILERONS (LW-PLA).factory
    • F4U-1D CORSAIR/FFF/CANOPY FRONT (LW-PLA).factory
    • F4U-1D CORSAIR/FFF/CANOPY REAR (CLEAR PLA).factory
    • F4U-1D CORSAIR/FFF/ELEVATORS (LW-PLA).factory
    • F4U-1D CORSAIR/FFF/FUSE 1 (LW-PLA).factory
    • F4U-1D CORSAIR/FFF/FUSE 2 (LW-PLA).factory
    • F4U-1D CORSAIR/FFF/FUSE 3 (LW-PLA).factory
    • F4U-1D CORSAIR/FFF/FUSE 4 (LW-PLA).factory
    • F4U-1D CORSAIR/FFF/FUSE 4 tailwheel slot (LW-PLA).factory
    • F4U-1D CORSAIR/FFF/FUSE 5 (LW-PLA).factory
    • F4U-1D CORSAIR/FFF/FUSE 6 (LW-PLA).factory
    • F4U-1D CORSAIR/FFF/HORIZONTAL STABILISERS (LW-PLA).factory
    • F4U-1D CORSAIR/FFF/m5 nut.factory
    • F4U-1D CORSAIR/FFF/MOTOR MOUNT (PETG OR PLA).factory
    • F4U-1D CORSAIR/FFF/PROPELLERS/PROPELLER 2 BLADE CONFIG (7x5) high speed ops.factory
    • F4U-1D CORSAIR/FFF/PROPELLERS/PROPELLER 3 BLADE CONFIG (6x4.5) recommended.factory
    • F4U-1D CORSAIR/FFF/PROPELLERS/PROPELLER 3 BLADE CONFIG (6x5) High power ops.factory
    • F4U-1D CORSAIR/FFF/tail wheel and lock (PLA).factory
    • F4U-1D CORSAIR/FFF/VERTICAL STABILISER + RUDDER (LW-PLA).factory
    • F4U-1D CORSAIR/FFF/WING INNER LEFT (GEAR SLOT) (LW-PLA).factory
    • F4U-1D CORSAIR/FFF/WING INNER LEFT (LW-PLA).factory
    • F4U-1D CORSAIR/FFF/WING INNER RIGHT (GEAR SLOT) (LW-PLA).factory
    • F4U-1D CORSAIR/FFF/WING INNER RIGHT (LW-PLA).factory
    • F4U-1D CORSAIR/FFF/WINGS OUTER LEFT (LW-PLA).factory
    • F4U-1D CORSAIR/FFF/WINGS OUTER RIGHT (LW-PLA).factory
    • F4U-1D CORSAIR/FFF/WINGTIPS (LW-PLA).factory
    • F4U-1D CORSAIR/G-CODE/AILERONS (LW-PLA).gcode
    • F4U-1D CORSAIR/G-CODE/CANOPY FRONT (LW-PLA).gcode
    • F4U-1D CORSAIR/G-CODE/CANOPY REAR (CLEAR PLA).gcode
    • F4U-1D CORSAIR/G-CODE/ELEVATORS (LW-PLA).gcode
    • F4U-1D CORSAIR/G-CODE/FUSE 1 (LW-PLA).gcode
    • F4U-1D CORSAIR/G-CODE/FUSE 2 (LW-PLA).gcode
    • F4U-1D CORSAIR/G-CODE/FUSE 3 (LW-PLA).gcode
    • F4U-1D CORSAIR/G-CODE/FUSE 4 tailwheel slot (LW-PLA).gcode
    • F4U-1D CORSAIR/G-CODE/FUSE 5 (LW-PLA).gcode
    • F4U-1D CORSAIR/G-CODE/FUSE 6 (LW-PLA).gcode
    • F4U-1D CORSAIR/G-CODE/HORIZONTAL STABILISERS (LW-PLA).gcode
    • F4U-1D CORSAIR/G-CODE/m5 nut.gcode
    • F4U-1D CORSAIR/G-CODE/MOTOR MOUNT (PETG OR PLA).gcode
    • F4U-1D CORSAIR/G-CODE/PROPELLERS/PROPELLER 2 BLADE CONFIG (7x5) high speed ops.gcode
    • F4U-1D CORSAIR/G-CODE/PROPELLERS/PROPELLER 3 BLADE CONFIG (6x4.5) recommended.gcode
    • F4U-1D CORSAIR/G-CODE/PROPELLERS/PROPELLER 3 BLADE CONFIG (6x5) High power ops.gcode
    • F4U-1D CORSAIR/G-CODE/VERTICAL STABILISER + RUDDER (LW-PLA).gcode
    • F4U-1D CORSAIR/G-CODE/WING INNER LEFT (GEAR SLOT) (LW-PLA).gcode
    • F4U-1D CORSAIR/G-CODE/WING INNER LEFT (LW-PLA).gcode
    • F4U-1D CORSAIR/G-CODE/WING INNER RIGHT (GEAR SLOT) (LW-PLA).gcode
    • F4U-1D CORSAIR/G-CODE/WING INNER RIGHT (LW-PLA).gcode
    • F4U-1D CORSAIR/G-CODE/WINGS OUTER LEFT (LW-PLA).gcode
    • F4U-1D CORSAIR/G-CODE/WINGS OUTER RIGHT (LW-PLA).gcode
    • F4U-1D CORSAIR/G-CODE/WINGTIPS (LW-PLA).gcode
    • F4U-1D CORSAIR/STL/AILERON INNER LEFT.stl
    • F4U-1D CORSAIR/STL/AILERON INNER RIGHT.stl
    • F4U-1D CORSAIR/STL/AILERON OUTER LEFT.stl
    • F4U-1D CORSAIR/STL/AILERON OUTER RIGHT.stl
    • F4U-1D CORSAIR/STL/CANOPY FRONT.stl
    • F4U-1D CORSAIR/STL/CANOPY REAR.stl
    • F4U-1D CORSAIR/STL/ELEVATOR INNER LEFT.stl
    • F4U-1D CORSAIR/STL/ELEVATOR INNER RIGHT.stl
    • F4U-1D CORSAIR/STL/ELEVATOR MIDDLE LEFT.stl
    • F4U-1D CORSAIR/STL/ELEVATOR MIDDLE RIGHT.stl
    • F4U-1D CORSAIR/STL/ELEVATOR OUTER LEFT.stl
    • F4U-1D CORSAIR/STL/ELEVATOR OUTER RIGHT.stl
    • F4U-1D CORSAIR/STL/FUSE 1 v1.1.stl
    • F4U-1D CORSAIR/STL/FUSE 2.stl
    • F4U-1D CORSAIR/STL/FUSE 3 v1.1.stl
    • F4U-1D CORSAIR/STL/FUSE 4 v1.1.stl
    • F4U-1D CORSAIR/STL/FUSE 4 with tailwheel slot.stl
    • F4U-1D CORSAIR/STL/FUSE 5.stl
    • F4U-1D CORSAIR/STL/FUSE 6.stl
    • F4U-1D CORSAIR/STL/HORIZONTAL STABILISER LEFT.stl
    • F4U-1D CORSAIR/STL/HORIZONTAL STABILISER RIGHT.stl
    • F4U-1D CORSAIR/STL/m5 nut.stl
    • F4U-1D CORSAIR/STL/MOTOR MOUNT 2804 2300KV.stl
    • F4U-1D CORSAIR/STL/propeller/2 blade hub.stl
    • F4U-1D CORSAIR/STL/propeller/3 blade hub.stl
    • F4U-1D CORSAIR/STL/propeller/6x4.5 blade .stl
    • F4U-1D CORSAIR/STL/propeller/6x5 blade.stl
    • F4U-1D CORSAIR/STL/propeller/7x5 blade.stl
    • F4U-1D CORSAIR/STL/propeller/spinner top.stl
    • F4U-1D CORSAIR/STL/RUDDER BOTTOM.stl
    • F4U-1D CORSAIR/STL/RUDDER TOP.stl
    • F4U-1D CORSAIR/STL/tail wheel lock.stl
    • F4U-1D CORSAIR/STL/tail wheel.stl
    • F4U-1D CORSAIR/STL/VERTICAL STABILISER.stl
    • F4U-1D CORSAIR/STL/WING INNER LEFT (GEAR SLOT).stl
    • F4U-1D CORSAIR/STL/WING INNER LEFT.stl
    • F4U-1D CORSAIR/STL/WING INNER RIGHT (GEAR SLOT).stl
    • F4U-1D CORSAIR/STL/WING INNER RIGHT.stl
    • F4U-1D CORSAIR/STL/WING OUTER LEFT.stl
    • F4U-1D CORSAIR/STL/WING OUTER RIGHT.stl
    • F4U-1D CORSAIR/STL/WINGTIP LEFT.stl
    • F4U-1D CORSAIR/STL/WINGTIP RIGHT.stl
    • Vought F4U-1D 600mm print settings.pdf
    • VOUGHT F4U-1D CORSAIR 600MM ASSEMBLY MANUAL.pdf

Learn more about the formats
Last update 2022-05-04 at 22:31
Publication date 2021-06-30 at 15:40
Design number 462337
3D_Aeroworks

3D_Aeroworks

3D printer file info

3D model description

Discounted version available here:

https://www.rc3dmarket.com/vought-f-4u-1d-corsair-600mm-lw-pla

A custom replica of the Vought F4u-1D, this 600mm wingspan version is designed to be powered by a 2804 2300kv electric out-runner and printed in LW-PLA this model looks as fantastic in air as it does on the ground. filled with details such as;
- scale spinner with 2 or 3 blade propeller
- clear canopy with window outlines
- scale intakes and exhausts
- option for removable "fixed" style landing gear

This model is recommended for the pilots with intermediate skills.

TEST FILES:
https://cults3d.com/en/3d-model/various/vought-f4u-1d-corsair-test-files

INCLUDED:

Factory files for Simplify 3d
G-code files
STL files for all components
Cura profiles for LW-PLA and regular PLA
Detailed assembly manual and user guide
Print settings guide for all parts

FLIGHT VIDEO:
https://www.youtube.com/watch?v=OKEeCDNpkug

Print time: 46hrs
Print weight: 200g
RTF AUW: 330g with gear listed below installed

REQUIRED COMPONENTS:
X1 2804 2300KV MOTOR (or similar)
X1 20AMP ESC
X1 950MAH 2S LIPO OR SIMILAR
X4 3.7G MICRO SERVO
X2 BAMBOO SKEWERS
HEAT SHRINK TUBE 3mm
X2 10mm X10mm X 2mm MAGNET (ROUND)
X10 MICRO HINGES
VELCRO
X2 x 200mm carbon strip 3mm x 0.6mm (optional)
M2 x10mm screws
M2 push rod 200mm (min length)

PRINT VOLUME:
200x200x200

For any questions and assistance please email us at:

aeroworks3d@outlook.com

NOTE: All STL files need to be enlarged to 1000% if using a program other than simplify3d.

Categories

All designs β€Ί Various

Tags

Advertising

Issue with this design? Report a problem.

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.