Mclaren F1 2020 Steering Wheel Semi-Replica V4

DIY Mclaren F1 3D printable Steering Wheel

Update 25/03/2023 (V4): **

-Modified bolts structure and front body for a better looking.

-New button caps added.

-Button grill modified.

• Now compatible with NRG/Moza/Simmagic style quick releases.

-New handles updated.

-Modified position of cluth paddles.

Update 11/07/2022 (V3): **

-Mono Shifters Model 1 replaced by Model 2.

-Now compatible with 70mm quick releases like the podium hub or the Q1r.

-Added new quick release spacers.

-Modified both front plates to give them a nicer look.

Update 05/30/2022 (V2): **

-Added a new variation for 4.3inch Vocore screen

-Modified all the back covers for threaded inserts instead of using nuts

-Added two side rotaries to get the wheel closer to the real one

-Button disposition and decoration modified to fit the new encoders

-Added new encoder knobs

Update 08/04/2022: **

-Remade the space for cables inside of the handles.

Update 28/03/2022: **

-Modified the QR part for logitech wheels in order to fit with new QR files.

-Modified the back body of the 50mm QR version in order to fit a little aluminum part to give it more strength.

Here is our semi-replica of the Mclaren F1 Wheel that is 100% 3D printable. This design includes our clutch paddles and our Magnetic Mono Shifters.

Parts:

Bolts and nuts:

Threaded Inserts - https://cutt.ly/MH6U865

4 x Button M2.5 20mm long

10 x Button M2.5 10mm long

4 x Button M3 10mm long

4 x Button M3 15mm long

6 x Flat M3 20mm long

2 x Flat M4 25mm long

8 x Flat M4 30mm long

4 x Socket M4 12mm long

3 x Socket M4 16mm long

6 x Flat M5 20mm long

4 x M3 Nuts

9 x M4 Nuts

6 x M5 Nuts

Electronics and other materials: **

8 x 10x5mm Magnets - https://cutt.ly/YLbOaAr

2 x microswitches w35 - https://cutt.ly/ZUn32Nw

2 x 10k Potentiometer - https://cutt.ly/bOSIB1r

2 x 8mm outer diameter, 1.2mm wire diameter, 20mm long spring - https://cutt.ly/MOGbkkV

4 x Rotary EC11 20mm long - https://cutt.ly/JOSYWYj or 4 x Bourns PEC11R-4220F-N0012 - https://cutt.ly/OJoHTyw

5 x Rotary EC11 15mm long - https://cutt.ly/fOSYVtB or

3 x Bourns PEC11R-4215F-S0012 - https://cutt.ly/pGlU76L + 2 x Bourns PEC11R-4215F-N0012 - https://cutt.ly/PJoHtWw

2 x momentary 2 way swtich - https://cutt.ly/0OSY9Nr

1 x Axles screws - https://cutt.ly/PUn30jY

2 x GX16 6 Pin Connector - https://cutt.ly/1OSYoKu

10 x Buttons - https://cutt.ly/8I14v3T

1 x Arduino Pro Micro - https://cutt.ly/nI141Yt

1 x Blue Pill STM32 C8T6 - https://cutt.ly/hOSIzF6

21 x PL9823 5mm Rgb Leds - https://cutt.ly/cI17wQT

1 x Vocore 4inch or 4.3inch screen - https://vocore.io/screen.html

1 x 6 core cable - https://cutt.ly/hOSK8cA

The .zip file includes all the stl of the model, renders, .dxf files for cnc services and a .step file. There are also 3 versions of the model, one for logitech wheels, another for thrustmaster wheels and another for 50mm pattern quick releases, like the Q1R. The diameter of the wheel is 270mm.

FOR PERSONAL USE ONLY - NON COMMERCIAL - NOT FOR RESALE

COPYRIGHT Canary Sim Wheel Designs - ALL RIGHTS RESERVED

You cannot sell the digital model, a derivative or adaptation of the model, nor can you sell prints of the model.

This design will require some high infill for the 3D Printed parts, from 60% to 100% and some good PLA, like PLA +, PLA850 or PLA870.