E-Zee-Storage Tawnar City

Designed to be quickly and easily printed on FDM/FFF 3d printers to create effective looking, detailed, functional table top wargaming terrain, providing LoS blocking, ruins, area terrain, trees, and higher ground to your battlefield, and impassable walls. These ruins have the benefit of being stacked together which allows compact storage of the printed models allowing TO's and gaming clubs to provide bulk amounts of quality terrain easily without the need of a large truck, van, cupboard to supply/store the vast amount of terrain needed, or for people who have a small living space, but want a lot of terrain options that do not take up a lot of space. As seen in the photos, you can fit a lot of this terrain in a small space, a full tables worth would take up a small cardboard box, or for those running large events, you could easily fit 3+ tables worth of terrain in a tupperware box that would normally only contain a single tables worth of terrain. Each 52L box in the photo contains 10 walls and 10 wall bases, 5 of each building, 5 small ruins, 5 large ruins, 5 area terrains, 5 trees, and the 50l box isn't even close to full.

The models them selves are quite quick and cheap to print due to them being only an outer shell for the walls and buildings, and the ruins pieces are quite low profile, are quite durable, and very easy to paint. The models in the photos were quickly hit with cheap rattle can paint, and a touch of brush work. Very suitable for people who want a LOT of effective terrain, quick, easily, and cheaply.

These files can be scaled to suit your needs or the size of your printer and still allow for easy compact storage. It is even possible to increase the size of each of the vase style pieces slightly as you print them, to further increase the storage effectiveness of these prints.

This file contains:
3x Tawnar buildings
2x Tawnar Wall pieces (Wall piece, and wall piece riser to allow for the walls to be less/more than 5" tall depending on your needs.)
1x Small ruins set
1x Large ruins set
1x Tree (including stump and bush)
1x Area terrain piece

These will form part of a set of E-Zee-Storage terrain in the future. Watch this space for more fantastic looking functional storage solution terrain.

Please read the readme file for printing set up instructions.

The files are designed to be printed on an FDM/FFF printer. Suitable for a printer with a bed of around 200-220mm or larger.

Your normal printer settings should work fine with these files but with different infill, bottom, and top layer settings.

All of the vase style files (buildings and walls) are designed to be printed with 0% infill. The walls and the Tawnar building one, will require being printed with no bottom layers, and a brim that barely touches the model to help with adhesion to the bed, and removal of the brim. The buildings two and three will need to be printed with no top layers and suppports will be needed at the roof section where the pattern is. No other supports are needed.

The ruins, trees, and area terrain piece should be printed as a normal solid model.

Highly recommend clean up of brims by using a machinists deburr tool.