Kyosho Mclaren 12C Display Base (Top Gear Theme)
Kyosho Mclaren 12C Display Base (Top Gear Theme)
3D
Published 2022-02-23T17:35:12+00:00
Print Settings
Nozzle size = 0.4 mm (minimum, smaller better)
Layer height = 0.2 mm
Filament change layer for colours on "BoxBackAssem":
1) Start (colours of the roads around the map, mine is in grey)
2) Layer 13 (Grass area of the track map, mine is in green)
3) Layer 18 (Top Gear "Gear" colour, mine is in blue)
4) Layer 23 (Colours for all lettering, mine is in white)
5) Layer 28 (Track map route colour, mine is in orange-ish golden)
6) Layer 33 (Mclaren symbol, arrows on tire wall and start, mine is in red)
Filament change layer for colours on "NamePlateAssem":
1) Layer 10 (Top Gear "Gear" colour, mine is in blue)
2) Layer 15 ("Top Gear" and "Test Track", mine is in white)
Colours
Colours of all other items is your choice.
Assembly
The car is screwed back using the original screw from Kyosho.
Back plate should slide in nicely into the display base. The name plate might need some trimming to the side to fit into the box.
Others
Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.
| Date published | 23/02/2022 |
| Support Free | YES |