Hotwheels Modern Classic 3 Display Base
Hotwheels Modern Classic 3 Display Base
3D
Published 2022-02-26T10:29:16+00:00
Description
A display base for Hotwheels Modern Classic 3 cars, the cars included in this sets are:
Nissan 300ZX Twin Turbo (1 of 5)
BMW M3 E30 (2 of 5)
Honda Prelude (3 of 5)
Mitsubishi Lancer Evolution VI (4 of 5)
Mitsubishi 3000GT VR4 (5 of 5)
The display base will work on any variant of the car that Hotwheels released. If you wish to use the display base on a different toy brand of the car, I could make another base to fit it. I need the length and width of the car base as shown here: Here
All 5 cars I've tested works on the same "BaseV2.STL" file. The name plate of each cars is similar, the only difference in each folder is the car number. The box back design for each car is similar in design since I want it to be seen as a set.
Print Settings
Nozzle size = 0.4 mm (minimum, smaller better)
Layer height = 0.2 mm
Filament change layer for colours on "300ZXBoxBack":
1) Start (Colour of the background, mine is in white)
2) Layer 14 (All logos outline and "Twin Turbo" letters colour, mine is in black)
3) Layer 19 ("Classic" lettering and "300ZX" lettering colours, mine is in white)
4) Layer 24 (Nissan 300ZX silhoutte colours, mine is in blue)
5) Layer 29 (Nissan 300ZX silhoutte colours, "Modern" lettering colours and Modern Classic stripes colours, mine is in red)
6) Layer 34 (Nissan logo background colours, mine is in grey)
7) Layer 39 ("Nissan" lettering colours on the Nissan logo, mine is in black)
Filament change layer for colours on "M3BoxBack":
1) Start (Colour of the background, mine is in white)
2) Layer 19 (All logos outline colour, mine is in black)
3) Layer 24 ("Classic" lettering, BMW M3 silhoutte and "M3" lettering colours, mine is in white)
4) Layer 29 (BMW logo quarters colours, top stripe colours and stripe on BMW M3 silhoutte colours, mine is in blue)
5) Layer 36 (BMW lower stripe, modern classic logo stripes and "Modern" lettering colours, mine is in red)
*The darker blue stripe as seen on my photos is coloured using marker pens.
Filament change layer for colours on "PreludeBoxBack":
1) Start (Colour of the background, mine is in white)
2) Layer 14 (All logos outline colour, mine is in black)
3) Layer 19 ("Classic" lettering, Honda logo, "Honda" lettering and Honda Prelude silhoutte colours, mine is in white)
4) Layer 24 (Stripe on Honda Prelude silhoutte and center stripe colour, mine is in gold)
5) Layer 29 ("Modern" lettering, modern classic logo stripe and Honda Prelude lower stripe colour, mine is in red)
Filament change layer for colours on "Evo6BoxBack":
1) Start (Colour of the background, mine is white)
2) Layer 14 (All logos outline, "VI", Mitsubishi Evo6 silhoutte stripes colours and "Mitsubishi" lettering colour, mine is in black)
3) Layer 19 ("Classic" lettering, stripe colour and Mitsubishi Evo6 silhoutte stripes colours, mine is in white)
4) Layer 24 (Mitsubishi Evo 6 silhoutte, Mitsubishi logo and left side stripe colour, mine is in red)
5) Layer 29 (Mitsubishi Evo6 silhoutte stripes colours, mine is in grey)
Filament change layer for colours on "3000GTBoxBack":
1) Start (Colour of the background, mine is in white)
2) Layer 14 (All logos outline and "Mitsubishi" lettering colour, mine is in black)
3) Layer 19 ("Classic" lettering, "3000GT" lettering, stripe colour and Mitsubishi silhoutte stripe colours, mine is in white)
4) Layer 24 (Stripe on Mitsubishi 3000GT silhoutte, "VR4" lettering, Mitsubishi logo and left side stripe colour, mine is in red)
Filament change layer for colours on "NamePlateXof5":
1) Start (Colour of background, mine is in white)
2) Layer 9 (Colour of logo outline and car numbers lettering, mine is in black)
3) Layer 14 ("Classic" lettering colours, mine is in white)
4) Layer 19 ("Modern" lettering and modern classic stripe colours, mine is in red)
Assembly
The car is tied by wires through the hole in the base
Back plate and name plate should slide in nicely into the display base. If the name plate is loose, double sided tape will hold it nicely
Others
Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.
I can be contacted through Instagram or Twitter too:
| Date published | 26/02/2022 |
| Support Free | YES |