Mechanical Flux Dispenser 3cc

Mechanical Flux Dispenser3ccI designed this dispenser for a 3cc syringe. It is more convenient to dose solder paste from small syringes, since its viscosity is very high and it is squeezed worse in a large syringe and has inertia for extrusion. This effect is much lower with the use of small syringe capacities.You can use a standard* syringe adapter, in the previous ones I showed how I did it, but you can also print it, as in this case.See Also: Electric Flux Dispenser , Mechanical Flux Dispenser 5cc , Old Dispenser 10cc , Flux Dispenser Magnetic Cap See the video for details: If you liked this thing - let me know by putting like!Parts links below: Industrial Syringe 3CC Threaded Rod Brass M3 Insert Knurled Nuts M3 Axial Thrust Ball Bearing  F3-8M Black O Ring Gasket CS 2mm OD 9mm Steel Dispensing Needles Tips Button Head Screw iso7380  M2.5x16 Luer Lock Adapter Coupler XD-Z40 No-Clean Mechanic Solder Tin Paste Syringe Adapter 3cc * Round Magnet 3x3 mm O-Ring 9x4x2.5mm TopZeal Filament ABS Links to used tools: Thread Screw Tap M2.5 Reamer Tool Drill Bit Set NOGA deburring tool and Blades Mini Wireless Grinder Angle grinder Ready made:Flux Dispenser 10cc Alu
Flux Dispenser 10ccRequired files: project-files.zip My favorites: Thank you for every tip or donation,it means great recognition for me and helps a lot to keep going! My some other things:

3D Printer • Accessories

Electronics Tools • Accessories

<a href="https://www.th

-