Skip to content

Improved Hinged Voron V0.1 Top-hat with LED holders

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 4.3/5 (3 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 4.4k views
  • 3 likes
  • 84 downloads
  • 1 make
License
3D design format
STL Folder details Close
  • FRONT_CONNECTOR.stl
  • HINGES.stl
  • LED strip holder.stl
  • REAR_CONNECTOR.stl
  • SIDE_CONNECTORS_X2.stl
  • TOPHAT_SPACER_FL%2BFR_.stl
  • TOPHAT_SPACER_RL%2BRR.stl
  • Tophat_front_corner_latch_LEFT_rev_A.stl
  • Tophat_front_corner_latch_RIGHT_rev_A.stl

Learn more about the formats
Last update 2022-03-22 at 16:33
Publication date 2022-03-19 at 20:36
?
Published to Thingiverse on: 2022-03-18 at 06:08
Design number 669195
staffert

staffert

3D printer file info

3D model description

UPDATE: LED strip holder design revised. 2022/03/22

Correction to the HINGES.stl file just posted 2022/03/18

NOTE: This design requires the original Voron V0.1 top-hat.

Great work by 93djen, (https://www.prusaprinters.org/prints/109713-voron-v01-tophat-spacer-with-hinges) but I had some fit issues and wanted more from the design.

The main changes are:

 - hole placements seemed to be just a bit off for my one piece top-hat, so that was compared to the original Voron V0.1 CAD files

  • locating pegs that extend down into the frame (as per the original top-hat)

  • LED ramps on the side that were extended in length to better accommodate 30 LED/m strips

  • slight move on the hinge pivot point holes as they seemed VERY tight and needed to be filed oval to fully close with the original design

    • redesign of segment joints to better match the lip/contour and provide larger glue surface for acetone welding. (yes, I screwed and glued this baby together!)
    • Added cable tie holes to the original top-hat front corners, for LED power routing.

I just glued the LED carriers to the frame as I trust acetone solvent welding more than cheap adhesive backing at temperatures over 30 C.

STEP files provided for anyone that wants to make changes.

Have fun.

3D printing settings

-

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.