Tricky Table Golf (TT Golf) Starter Set

Legal stuff:

BY DOWNLOADING THE FILES FROM THINGIVERSE YOU AGREE TO THE FOLLOWING TERMS AND CONDITIONS:

The files are for private use only!

You are allowed to print parts from them for your personal use only!

You are not allowed to use these files or parts you printed with the use of these files of it in any comercial way!

If you are distributing Pictures from parts or models you build with theses files you are only allowed to do so if you are declaring the source of the design. You have to add a link to this thingiverse-thing in the description of your photos!

You are not allowed to copy or distribute them in any way!

You are not allowed to sell them or parts you printed from them or models you build with the use of these files!

Description:

Forget Golf on the Computer or Game Console, this is the real deal! Play golf on your diner table. Train alone or compete with your friends, this is great fun and also makes for a great gift to others. So stop reading, start printing and work on your par! Great fun for every age from 4 to 99

If you enjoy playing please leave a like.

This is the starter pack with a golfer and the putting green. I will add obstacles and some different golfer figures on a regular basis. So follow me or search for Tricky table golf to find new content for this funny game.

I recommend using a xxl mouse pad as a playfield, because the balls roll better on the Surface of the pad.

Assembly instructions:

Print all parts without supports, none needed! Easy to print.

Print all the parts for the golfer once, the connector file includes the three connectors.

You need two small round metal cylinders as a weight, 8mm diameter and 3mm high, I use small magnets which you can buy online. Magnets have the advantage that they hold together, but you can also cut an M8 screw to the right length.

Put the two metal parts in the round hole of the lever, put the golf club through the round hole of the front part and put the lever on the cylinder of the golf club. Then place the 3 connectors in the back part, place the pusher in the groove of the back part and clip both parts together. I would recommend to use some silicon spray on the pusher so that it will work more smootly. Print the balls (I recommend high quality or 0.1mm layers here) and start golfing!

The Finish has only two parts, the base and the green, The green is a flat file, I recommend to print it upside down if you have a glass printing bed, so you get a smooth surface.

-