3d print ready Assembly Toy Windmill

Designed by: www.printednest.com
This windmill improves motor skills . Windmill gives you twice the fun: during assembly and, of course, when playing afterwards. Windmill is very easy to assemble. Watch our step-by-step manual to show you exactly how to do it. Or you can just try to solve with your kids together and figure it out for yourself. The assembly is done without effort by a screw principle. It mainly develops children's fine motor skills, their imagination and vision. At the same time, the child can practice breathing exercises and spin the mill by blowing!

We have new updated screws solution. It will never break.

Assembly guide for Windmill: https://www.youtube.com/watch?v=Tdj_KLCS3g4&t=4s

Check also our:
3d printed Assembly Toy Car Grand:Prix:https://youtu.be/93raBHytPA8
3d printed Assembly Toy Airplane Air Race:https://youtu.be/78YJJuntbeg
3d printed Assembly Chopper:https://youtu.be/cGSrvUdp-zw

You can buy all models above: https://www.printednest.com

facebook: https://www.facebook.com/printednest
Printednest Makers | 3d Print Group: https://www.facebook.com/groups/printednest
twitter: https://twitter.com/printednest
instagram: https://www.instagram.com/printednest/

All files should be printed with this setting.

Recomended Material : PLA or PETG
Nozzle Diameter : 0.4mm
Layer Height : 0.2mm
Top Solid : 5
Bottom Solid : 4
Outline : 2
Raft : NO
Brim: NO
Support : NO
In-fill Percentage : 10-15%

For 07_screw.stl, 08_screw_cap.stl we recomend this settings:

Recomended Material : PETG or ASA
Nozzle Diameter : 0.4mm
Layer Height : 0.15mm
Top Solid : 5
Bottom Solid : 4
Outline : 4
Raft : NO
Brim: NO
Support : NO
In-fill Percentage : 100%