Dual 1/64 Need for Speed Hot Pursuit Display
Dual 1/64 Need for Speed Hot Pursuit Display
Published 2022-04-30T10:53:15+00:00
Custom display base are also available at $5! Contact me to discuss what you want!
A Need for Speed Hot Pursuit theme display base for 2 1/64 scale cars.
The cars I used in the photos are Mini GT Pagani Huayra and Tarmac Works Lamborghini LP750-4 SV NFS Police. I used those 2 cars because I couldn't find a orange Zonda Cinque and police Reventon.
If you wish to have a display base tweaked to fit to a different car from a different brand, please send me these dimension for the display base holes: https://imgur.com/5T6mb2L
The display base is separated into 2 parts for easy printing and colour swap. The parts are:
1) Base (BaseV3.STL)
2) Flat Base (FlatBase.STL)
Print Settings
Nozzle size = 0.3 mm (Should be printable with 0.4)
Layer height = 0.28 mm (I set to 0.28mm just to print it faster)
Filament change layer for colours on "FlatBase.STL":
1) Start (Lines on the road, mine is in white)
2) Layer 4 (Road colour, mine is in black)
3) Layer 6 ("NEED FOR SPEED" lettering and NFS logo colour, mine is in white)
4) Layer 10 ("HOT PURSUIT" colour, mine is in red)
Assembly
The car is tied by wires through the hole in the base
Flat base will need to be glued or double sided tape on to the base, the flat base will fall off if there is no glue or tape.
Others
Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.
I can be contacted through Instagram or Twitter too:
Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/
Date published | 30/04/2022 |
Support Free | YES |