Kraftform Tool Holder / Collet Clamping System

Simple Toolholder with collet system in “Kraftform” Design

a) If you want to print with 2 color, use the file “Kraftform_2K”

b) If you want to print with 1 color, use the file “Kraftform_1K”

c) If you want to print with Fuzzy Skin, use the file “Kraftform_FuzzySkin”

• For Fuzzy Skin, look at the photo for slicer settings.
• The Nut and Collets are the same for every Kraftform Grip.
• Print the Collets with Brim

UPDATE: 11.01.2022

• added: Collet Bit 6.35mm
• added: Collet 3.5mm
• added 0.4mm chamfer to Collet holes on both sides