Skip to content

Gundam AoZ - ARZ-124QN TR-6 Queenly [Conversion Kit]

20250427_233823.jpg Gundam AoZ - ARZ-124QN TR-6 Queenly [Conversion Kit]
20250427_233749.jpg Gundam AoZ - ARZ-124QN TR-6 Queenly [Conversion Kit]
20250427_233803.jpg Gundam AoZ - ARZ-124QN TR-6 Queenly [Conversion Kit]
20250427_233808.jpg Gundam AoZ - ARZ-124QN TR-6 Queenly [Conversion Kit]
Advance-Kehaar-II-Containers-solid.png Gundam AoZ - ARZ-124QN TR-6 Queenly [Conversion Kit]
Advance-Kehaar-II-head-addon.png Gundam AoZ - ARZ-124QN TR-6 Queenly [Conversion Kit]
Placement-for-head-addon-link.jpg Gundam AoZ - ARZ-124QN TR-6 Queenly [Conversion Kit]
Queenly-Fuel-Pod-Deadalus-Unit.png Gundam AoZ - ARZ-124QN TR-6 Queenly [Conversion Kit]
Queenly-Upper-Frame-Assembly-1.png Gundam AoZ - ARZ-124QN TR-6 Queenly [Conversion Kit]
Queenly-Upper-Frame-Assembly-3.png Gundam AoZ - ARZ-124QN TR-6 Queenly [Conversion Kit]
Queenly-Lower-Frame-Assembly.png Gundam AoZ - ARZ-124QN TR-6 Queenly [Conversion Kit]
TR-Series-Cargo-Container-1.png Gundam AoZ - ARZ-124QN TR-6 Queenly [Conversion Kit]
visual-2.jpg Gundam AoZ - ARZ-124QN TR-6 Queenly [Conversion Kit]
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (2 votes)
Evaluation of members on the printability, utility, level of detail, etc.
License
Usages
3D design format
1 file (ZIP) Close
  • ARZ-124QN TR-6 Queenly [Conversion Kit].zip
    • Advance Kehaar II - Containers (solid)/Advance Kehaar II - Containers (solid) - container link.stl
    • Advance Kehaar II - Containers (solid)/Advance Kehaar II - Containers (solid) - container rear plate.stl
    • Advance Kehaar II - Containers (solid)/Advance Kehaar II - Containers (solid) - dorsal brace.stl
    • Advance Kehaar II - Containers (solid)/Advance Kehaar II - Containers (solid) - shoulder link.stl
    • Advance Kehaar II - Containers (solid)/Advance Kehaar II - Containers (solid) - solid container.stl
    • Advance Kehaar II - Containers (solid)/TR-Series Cargo Container - dorsal.stl
    • Advance Kehaar II - Containers (solid)/TR-Series Cargo Container - side detail 2 l-r.stl
    • Advance Kehaar II - Containers (solid)/TR-Series Cargo Container - upper hinge cover.stl
    • Advance Kehaar II - Head Addon/Advance Kehaar II - head addon 1.stl
    • Advance Kehaar II - Head Addon/Advance Kehaar II - head addon 2.stl
    • Advance Kehaar II - Head Addon/Advance Kehaar II - head addon 3.stl
    • Advance Kehaar II - Head Addon/Advance Kehaar II - head addon 4.stl
    • Advance Kehaar II - Queenly Shoulder Link/Adv Kehaar II Link - Note.txt
    • Advance Kehaar II - Queenly Shoulder Link/Adv Kehaar II Link.stl
    • ARZ-124QN TR-6 Queenly - Notes, Assembly Instructions, Parts to print & Hardware.txt
    • Hrududu II Arm/FF-X29A G-Parts Hrududu II - lower arm.stl
    • Hrududu II Arm/FF-X29A G-Parts Hrududu II - middle arm L-R.stl
    • Hrududu II Arm/FF-X29A G-Parts Hrududu II - upper arm pinned.stl
    • Other Parts/Queenly - TR-6 chest connector for claw cannon.stl
    • Other Parts/stand link.stl
    • Other Parts/TR-6 Speed Crest v2 (1-144).stl
    • Post text.txt
    • Queenly - Fuel Pod (Deadalus Unit)/Fuel Pod (Deadalus Unit) - aft.stl
    • Queenly - Fuel Pod (Deadalus Unit)/Fuel Pod (Deadalus Unit) - core a - pinned.stl
    • Queenly - Fuel Pod (Deadalus Unit)/Fuel Pod (Deadalus Unit) - core b - pinned.stl
    • Queenly - Fuel Pod (Deadalus Unit)/Fuel Pod (Deadalus Unit) - core, whole.stl
    • Queenly - Fuel Pod (Deadalus Unit)/Fuel Pod (Deadalus Unit) - dorsal.stl
    • Queenly - Fuel Pod (Deadalus Unit)/Fuel Pod (Deadalus Unit) - side A, l&r.stl
    • Queenly - Fuel Pod (Deadalus Unit)/Fuel Pod (Deadalus Unit) - side B, l&r.stl
    • Queenly - Fuel Pod (Deadalus Unit)/Fuel Pod (Deadalus Unit) - ventral w-stand plug.stl
    • Queenly - Fuel Pod (Deadalus Unit)/Fuel Pod (Deadalus Unit) - ventral.stl
    • Queenly - Lower Frame Assembly/Queenly Lower Frame Assembly - container + hip link.stl
    • Queenly - Lower Frame Assembly/Queenly Lower Frame Assembly - lower container - pod support arm.stl
    • Queenly - Lower Frame Assembly/Queenly Lower Frame Assembly - lower container - pod support link.stl
    • Queenly - Lower Frame Assembly/Queenly Lower Frame Assembly - lower container rear.stl
    • Queenly - Lower Frame Assembly/Queenly Lower Frame Assembly - queenly core fuel pod link.stl
    • Queenly - Lower Frame Assembly/Queenly Lower Frame Assembly - TR-6 drum frame block.stl
    • Queenly - Upper Frame Assembly/FF-X29A G-Parts Hrududu II - chest cannon arm.stl
    • Queenly - Upper Frame Assembly/FF-X29A G-Parts Hrududu II - drum frame pinned.stl
    • Queenly - Upper Frame Assembly/FF-X29A G-Parts Hrududu II - engine pod pinned.stl
    • Queenly - Upper Frame Assembly/Queenly Upper Frame Assembly - binder frame.stl
    • Queenly - Upper Frame Assembly/Queenly Upper Frame Assembly - chest cannon.stl
    • Queenly - Upper Frame Assembly/Queenly Upper Frame Assembly - head cover.stl
    • Queenly - Upper Frame Assembly/Queenly Upper Frame Assembly - head eye.stl
    • Queenly - Upper Frame Assembly/Queenly Upper Frame Assembly - Hrududu II pod shoulder link.stl
    • Queenly - Upper Frame Assembly/Queenly Upper Frame Assembly - shoulder kehaar step down.stl
    • Queenly - Upper Frame Assembly/Queenly Upper Frame Assembly - shoulder upper kehaar link.stl
    • Queenly - Upper Frame Assembly/TR-6 [Hrairoo II] - binder shroud.stl
    • Queenly - Upper Frame Assembly/TR-Series Cargo Container - Hrairoo II link b.stl
    • TR-Series Cargo Container/TR-Series Cargo Container - armored container.stl
    • TR-Series Cargo Container/TR-Series Cargo Container - door hinge.stl
    • TR-Series Cargo Container/TR-Series Cargo Container - door.stl
    • TR-Series Cargo Container/TR-Series Cargo Container - dorsal.stl
    • TR-Series Cargo Container/TR-Series Cargo Container - Hrairoo II link a.stl
    • TR-Series Cargo Container/TR-Series Cargo Container - module - engine 1.stl
    • TR-Series Cargo Container/TR-Series Cargo Container - module - engine 2.stl
    • TR-Series Cargo Container/TR-Series Cargo Container - module - missile launcher.stl
    • TR-Series Cargo Container/TR-Series Cargo Container - module - missile.stl
    • TR-Series Cargo Container/TR-Series Cargo Container - rear hatch cover.stl
    • TR-Series Cargo Container/TR-Series Cargo Container - side cover l-r.stl
    • TR-Series Cargo Container/TR-Series Cargo Container - side detail 1 l-r.stl
    • TR-Series Cargo Container/TR-Series Cargo Container - side detail 2 l-r.stl
    • TR-Series Cargo Container/TR-Series Cargo Container - side thruster l-r.stl
    • TR-Series Cargo Container/TR-Series Cargo Container - upper brace.stl
    • TR-Series Cargo Container/TR-Series Cargo Container - upper hinge cover.stl
    • TR-Series Cargo Container/TR-Series Cargo Container - upper thruster.stl

Learn more about the formats
Publication date 2025-04-28 at 06:54
Design number 2938985
Queadlunn

Queadlunn

Issue with this design? Report a problem.

3D printer file info

3D model description

This is a big one.

My take on the Queenly from Advance of Zeta Reboot. While it's not fully accurate to specific art, I think it gets the point across.

Bandai MS kits needed for this build:
TR-6 Woundwort (absolute minimum, upper body and arms)
1x Hrududu II Expansion Set -OR- 2x Hrududu II Expansion Set (claw cannons for the rear arms)
2x TR-6 Kehaar II
Kit with Gigantic Arms Unit (just the big arms) -OR- Psycho Gundam
Haze'n-thley II (legs only)

Other maker's parts used:
-The hip booster parts are from this pack: https://www.thingiverse.com/thing:6277558 ("thruster.obj") by Silkburrito27. These are drilled to add 3mm sockets and use the 30deg link part from the Hrududu II addon kit to attach to the pods

I designed and test-printed these files with Anycubic ABS-Like Resin Pro 2 (Gray), all parts worked well and most could be friction fit with the assorted 1/2/3mm pins needed.

Using the whole MA-mode Kehaar II with the added containers and head cannon assembly, the shoulders with metal rod barely sags without any glue.

You can use either the stand adapter part to DIY a stand together WITHOUT the Fuel Pod assembly, OR use the Fuel Pod assembly with it's 5mm square socket and use the fuel pod as a stand in itself.

A few parts are for both left & right.

There's a big text file and more photos in the zip with more information and instructions.

3D printing settings

Best used with resin printing.

Categories

All categories β€Ί Art β€Ί Sculptures & busts / Fan Art / Scans & Replicas

Tags

Advertising

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi πŸ’œ.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.