Easy to sell 6 for price of 5 adjustable GPU holder pack

Easy print to sell.
You are free to 3D print and sell the printed part.

Check out other GPU supports:
https://cults3d.com/en/design-collections/Rambrand/pc-accessories

This is a GPU support pack. The pack contains 6 GPU supports.
Please check the links below for more detailed information on each model.

ADJUSTABLE GPU SUPPORT HOLDER NEW TUF GAMING ASUS:
https://cults3d.com/:1290228

ADJUSTABLE GPU SUPPORT HOLDER TUF GAMING ASUS:
https://cults3d.com/:1279403

ADJUSTABLE GPU SUPPORT HOLDER ASUS ROG:
https://cults3d.com/:1225302

ADJUSTABLE GPU SUPPORT HOLDER ELDEN RING:
https://cults3d.com/:1177500

ADJUSTABLE GPU SUPPORT HOLDER NVIDIA:
https://cults3d.com/:1173323

ADJUSTABLE GPU SUPPORT HOLDER AMD:
https://cults3d.com/:1163073

A GPU holder/support prevents GPU sag, which is quite common today because the GPUs are big.

Easy to assemble with no supports.

This model is adjustable from 60mm to 100mm.
Or 50mm to 90mm.
If you need a smaller or bigger height, let me know and I will update the model.

This product contains 3 parts, and no hardware is necessary for assembly.

Part list:
GPU_Foot
Gpu_Foot(50)
Logo_plate
Screw
Screw(50)

This is an effortless print, no supports are needed.

I used Superglue to glue the plate to the body. There are 2 round holes on the plate that will be used to align the plate to the foot properly. Using the 2 round indents on the foot.

Layer height: 0.2
Line width: 0.6
No supports.
Infill: 15%

For the GPU foot on my printer, I had to set "Hole Horizontal expansion" to 0.5mm. This is to allow the screw to turn easier, I recommend you do the same.