This Wicca-inspired 3D printable Witch Hat Shelf makes a perfect display for exhibiting your favorite crystals, knick-knacks, or spell components. Makes a great Halloween decoration or everyday home decor furnishing.
The download comes with a series of STL files compiled in two ZIP folders - one for Standard-size printers with a 220x220mm bed, and one for larger print volumes of 300x300mm and up. Choose your files accordingly.
(Note that the Witches Hat Shelf - WHOLE files are meant for preview purposes on Cults3D, and is not meant for printing.)
You'll also find two optional Hat Brim bases for the shelf. One is a Full Brim, best for placing the shelf in an opening area. The second is a Half Brim. This one has a flat back for setting the shelf against a wall.
WITCH HAT SHELF PRINT & ASSEMBLY
You'll need to print a total of three STL files. Remember to choose the files that suit your 3D printer's build volume. You'll need one of each:
- Back Panel
- Walls
- Brim (Full or Half)
The back panel is a dual-layer print. The middle is raised up where it will fit into each section of the shelf walls. If your printer is capable of pausing for a filament change (e.g. Cura's Pause at Height function), you can print the first half of this in black, and the second half in whatever color you want the shelf's background to be. We chose purple. Alternatively, you can print the whole back panel in your background color of choice, then paint the outside to match the outer shelf walls.
Assembling the shelf is very easy. Start by lining up the back panel with the back of the outer walls. Press firmly until it snaps into place. It should be a very snug fit, but you can apply glue if you wish.
You'll notice that the back panel sticks out a little below the bottom of the shelf walls. This extended edge will fit inside the recessed line on the shelf's hat-brim base. Use glue on the protruding line and bottom of the walls, then adhere the Wall+Back Panel to the Hat Brim base.
Allow plenty of time for the glue to dry, and you're all set! Add your favorite display items and enjoy.
DIMENSIONS @ FULL & STANDARD SIZE
The Witches Hat 3-Tier Shelf comes in two sizes, based on 3D printer bed volume. For each bed size, the shelf walls come in two sizes, as well. If you choose the larger size, the print time will be longer, but you'll get a deeper shelf with more space.
Fully assembled, the shelves and corresponding dimensions are as follows:
Standard 220x220mm Print Volume
Witch Hat Shelf - Standard Size - Full Brim Base
- X = 25.7cm / 10.1in
- Y = 13.7cm / 5.4in
- Z = 19.0cm / 7.0in
Shelf Depth Options
- Shallow = 4.5cm / 1.8in
- Deep = 6.5cm / 2.6in
Witch Hat Shelf - Standard Size - Half Brim Base
- X = 25.5cm / 10.0in
- Y = 10.3cm / 4.1in
- Z = 19.0cm / 7.0in
Shelf Depth Options
- Shallow = 4.5cm / 1.8in
- Deep = 6.5cm / 2.6in
Large 300x300mm+ Print Volume
Witch Hat Shelf - Full Size - Full Brim Base
- X = 30.0cm / 11.8in
- Y = 16.0cm / 6.3in
- Z = 22.3cm / 8.8in
Shelf Depth Options
- Shallow = 5.0cm / 2.0in
- Deep = 7.6cm / 3.0in
Witch Hat Shelf - Full Size - Half Brim Base
- X = 30.0cm / 11.8in
- Y = 12.1cm / 4.8in
- Z = 22.3cm / 8.8in
Shelf Depth Options
- Shallow = 5.0cm / 2.0in
- Deep = 7.6cm / 3.0in
If you like our Decorative Witch Hat Display Shelves, please check out our other GetPrinted3D Creations on Cults3D (including many more Wiccan / Gothic home decor!)
IMPORTANT Copyright Info Unless otherwise noted, ALL GetPrinted3D designs are Copyright protected. When you purchase a file, you do NOT have the right to sell the file or printed model. Files may not be redistributed under any circumstances. The models are for personal and private use, and may not be sold commercially without the explicit written consent of GetPrinted3D.
You can obtain a Commercial License to legally sell our designs here:
- https://www.patreon.com/GetPrinted3D