Genshin Impact - Klee [Blossoming Starlight] Sling Bag Accessories

This model is designed for Klee - Blossoming Starlight outfit cosplay from Genshin Impact.

It comes in 3 main parts, which are the accessory on the sling bag belt, the lamp hanging on the bag, and the accessory on top of the bag.

There are pictures with parts labeled to their file name in the preview section which you can refer to.

The lamp is divided into multiple parts for a more flexible crafting option. However, I also include a combined version just in case you need it.

Part A is divided into 3 parts. Depending on how you want to craft this section, you can choose to print only A1 if you only need the appearance. Part B is quite straightforward to craft.

Parts C, D, and E are the accessories for the lamp. You can chain all the parts by sandwiching a thin iron string between them which says you will need two copies of each part. There is a hole with a 5mm diameter punch on Part F for the string to pass through. You can also attach a keychain ring and attach to the string that passes through C, D, and E.

Part H is a shell with a 2mm wall. You can print this in a translucent material if you need to make it glow by throwing in some battery-powered LED.

Part I is the base of the lamp. You will need to use a lot of support when printing this part. Some of the support will apply to the thin-hanging part that required extra care and patience to remove.

Part J is the handle of the lamp. You will need two copies of this part. Cut-out is made on Parts F and I for alignment and installation purposes.

Part K is the most difficult part to make as you will need a lot of support applied on a large surface which makes it very difficult to remove. If you have another alternative to craft this part, such as Eva foam I will advise you to do so.

Part L is the accessory attached to Part K. It is quite straightforward to craft.

For scaling, all the parts can be scaled using individual scale factors. It is designed for a model with a height of around 155cm. You can use this as a reference to scale the parts.

Cheers and Happy Printing!