CUTE FAIRY HOUSE V6 - THE BELL PEPPER!!! No Supports needed

***NOTE: COPYRIGHT PA1© - PERSONNAL USE ONLY. SUBSCRIBE TO MY PATREON TO GET ALL MY FILES FOR FREE, PLUS EXCLUSIVE MODELS AND A COMMERCIAL LICENSE TO SELL YOUR PRINTS. LINK TO PATREON :

https://www.patreon.com/PA1_MAKER***

Here's the latest addition to the fairy houses collection! Cute little houses for your landscaping and flower pots! Kids love them a lot too!

So here's a cute bell pepper house, with a double door and oval windows.

The design is made of individual parts, so you DON'T need to have a multicolor printer.

The design is easy to print, easy to assemble and requires NO supports.

For the instructions, its the same thing as the other fairy houses, but here's a quick summary;

-Everything is already placed in the right orientation for printing.

-NO SUPPORTS are needed.

-Check carefuly the exploded views for visual references and placement.

-Make a dry fit check before gluing!!!

-Can be used with or without the base depending on what you prefer.

Start by assembling the chimney first. Then proceed to the rest of the assembly.

Suggested layer height: 0.12mm. The design can be printed with any layer height, but because of the round section of some parts, 0.12mm will give a nice, smooth result.

The overhang at the top of the door opening may be tricky a bit. Make a dry fit check of the door frame before gluing. Try to remove the excess material if the overhang is sagging a bit. You can also try to reduce speed/temperature if you are experiencing some problem.

In any case, if you have some questions or problems, send me a private message! I will help you as much as i can, like i always do!

That's it! Have fun my friends!

Whole collection available on my profile:

https://cults3d.com/en/users/PA1_MAKER/creations