MECHANICAL GORILLA 3MF - FLEXI - DO NOT SUPPORT

This STL 3D printing model, no brackets, no assembly needed, this amazing Gorilla model transform you can print it in parts, or complete.

YOU WILL FIND 2 FILES 3MF BAMBU LAB GENERIC IN 5 COLORS

3MF FILES HEAD AND MASK, THE PINS ARE SUPPORTED.

2 FILE 3MF, MEGANIC CAP HEAD HOLDER

10 STL FILE KEY RING WORKS VERY WELL AT 50%.

You will find 7 files:

HEAD, ROBOTIC FACE, KNOB, PINS, robotic support

This model has the ability to move its jaw and mask at the same time thanks to its pinion design, this design has a small stop on the letter, which helps to keep the mask open, so it can only be opened and closed by pushing the jaw.

Design was created, to be able to print it in very small sizes, like at 50 scale, it looks great or at 100 percent so you can print it to your liking.

If you print the pins or sprockets separately they do require support, if you want the curves or hollows of the mask and jaw to come out cleaner use support if you print it over 100 to 150 👌.

This model has an amazing robotic stand, where you can hang the Gorilla.

For all users who have an active subscription to me https://www.patreon.com/studiosDB92 will find a letter of authorized by STUDIOS DIGITAL BROTHERS to be able to sell all models already 3D printed.

ALL STUDIOS DIGITAL BROTHERS designs are protected by Intellectual Property Law. My digital files can NEVER be resold or shared in any way.

*Without brackets

*Print-in-place (without mounting)

*10 to 15 % filler to be sure.

*I suggest 3 walls to make the peaks stronger.

*PLA works very well

*Horzontal expansion in the walls 0.0