TRICERATOPS VS. T-REX (AUTOMATA)
$19.90 TRICERATOPS VS. T-REX (AUTOMATA)
3D
Published 2023-07-17T10:08:00+00:00
It took me more than three months to design this dinosaur-themed automata.
The work includes a Tyrannosaurus rex and a Triceratops. These two dinosaurs can operate independently, or they can be operated synchronously by installing the attached link file. When the dinosaurs operate in sync you will see two dinosaurs fighting against each other.
I believe this image was once seen 60 million years ago.
You can also download one of the dinosaurs separately. If you download Triceratops and T-Rex at different times, you will also get the connecting rod kit that connects the two dinosaurs. The connecting rod kit allows the two dinosaurs to operate synchronously. (The kit is in the T-Rex folder)
This work is my most satisfying design in 2023. I hope all my friends will like it too.
https://youtu.be/EmO5bZdzU18
Roaring T-Rex (Automata)
https://youtu.be/LCaTq_M5YFA
Sprinting Triceratops (Automata)
https://youtu.be/1y-6vHhlkFI
The design of automata is very difficult. The shape and mechanism must be correct so that the work can effectively present its supposed appearance. Therefore, the design process always requires constant revision and adjustment. The design and revision of this work took more than 3 months, which is why I can't release a large number of works.
print suggestion
1. If your 3D printer is suitable for printing this work, you can download this file to test your machine and printing settings.
https://www.myminifactory.com/object/3d-print-gap-test-fish-112287
2. Print layer height -0.2mm
3. If the file name contains (s), support is required when printing and the support angle is 30
4. It is not recommended to print at a reduced size (unless you are very confident in your skills)
5. Assembly does not require tools and glue
三角龍與暴龍的對抗
我花了超過三個月的時間來設計這個以恐龍為主題的automata。
作品裡面包括一隻暴龍與一隻三角龍，這兩隻恐龍可以各自獨立運作，也可以透過安裝附送的連桿檔案來同步運作。當恐龍同步運作時你會看到兩隻恐龍對抗的畫面。我相信這個畫面曾經出現在6千萬年前。
恐龍也可以單獨下載其中一隻，如果你分成不同時間兩次下載Triceratops 和T-Rex，一樣能得到連結兩隻恐龍的連桿套件(套件在T-Rex 檔案夾內)，以達到讓兩隻恐龍同步運作的目的。
這個作品是我2023年最滿意的設計。希望所有的朋友也會喜歡。
Automata 的設計是很困難的，造型與機構都要正確，作品才能有效地呈現出它應該的樣子。所以設計的過程總是要不斷的修改與調整，這個作品的設計與修正時間超過3個月，這也正是我沒辦法大量的發行作品的原因。
列印建議
1.如果你的3D列印機是不是適合列印這個作品，你可下載這個檔案來測試你的機器與列印設定。https://www.myminifactory.com/object/3d-print-gap-test-fish-112287
2列印層高-0.2mm
3.檔案名稱有包含(s)的檔案，列印時需要支撐，支撐角度30
4.不建議縮小列印 (除非你對自己的技術非常有信心)
5.組裝不需要工具與膠水
| Date published | 17/07/2023 |
| Price | $19.90 |