CUTE FAIRY HOUSE V7 - THE EGGPLANT! No Supports needed!

NOTE: COPYRIGHT PA1© - PERSONNAL USE ONLY. SUBSCRIBE TO MY PATREON TO GET ALL MY FILES FOR FREE, PLUS EXCLUSIVE MODELS AND A COMMERCIAL LICENSE TO SELL YOUR PRINTS. LINK TO PATREON :

https://www.patreon.com/PA1_MAKER

Here's another addition to the fairy houses collection! Cute little houses for your landscaping and flower pots! Kids love them a lot too!

This little eggplant house will be an eye catcher for sure!

The design is made of individual parts, so you DON'T need to have a multicolor printer.

The design is easy to print, easy to assemble and requires NO supports.

For the instructions, its the same thing as the other fairy houses, but here's a quick summary;

-Everything is already placed in the right orientation for printing.

-NO SUPPORTS are needed.

-Check carefuly the exploded views for visual references and placement.

-Make a dry fit check before gluing!!! This will help you figuring out how the parts goes together.

-Can be used with or without the base depending on what you prefer.

FOR THE LEAVES: To bend the little leaves, use a little heat (like a hair dryer or heatgun) and bend the leaf around the top of the eggplant. DO NOT GLUE THE LEAVES YET! Shape all the leaves like you want, make some correction if needed and once they are bent in a way you like, proceed to gluing.

Suggested layer height: 0.12mm. The design can be printed with any layer height, but because of the round section of some parts, 0.12mm will give a nice, smooth result.

The overhang at the top of the door opening may be tricky a bit. Make a dry fit check of the door frame before gluing. Try to remove the excess material if the overhang is sagging a bit. You can also try to reduce speed/temperature if you are experiencing some problem.

In any case, if you have some questions or problems, send me a private message! I will help you as much as i can, like i always do!

That's it! Have fun my friends!

Whole collection available on my profile:

https://cults3d.com/en/users/PA1_MAKER/creations