3D printed light up wand! Inspired by Harry Potter

Full build tutorial link here: https://www.youtube.com/watch?v=Faw-TeZUJ54

Light up the night with your own 3D printed light-up wand/wand flashlight! This wand was inspired by Harry Potter and the spell “lumos.” If you are considering building the light-up wand, please watch our full tutorial video for the needed items/materials and step-by-step instructions for how to build it. We included 3 files for this project – a 1-piece solid wand (same wand as the light-up version but no space for electronics), a 2-piece wand that has the space to include the electronics for the lighting, and a wand stand. For full project details and available 3D models, visit our website at makeitlabchannel.com.

This design, like all Make It Lab designs, is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially. If you would like to legally sell them commercially, please consider joining our Patreon:

https://www.patreon.com/MakeItLab

The Digital files are never to be re-sold, shared, or given away!

Please consider subscribing to our Youtube channel here: https://www.youtube.com/channel/UCnXgPCj_NgizXnv_ArxK2TQ

I printed the wand(s) with the following settings:

3D Model slicer: Cura version 4.13.1
3D Printer: Ender 3 Max
Layer Height: 0.2 mm
Nozzle temperature: 205 degrees C
Bed temperature: 60 degrees C
Retraction speed: 50 mm/s
Retraction distance: 6.5 mm
walls: 3
Print speed: 50 mm/s
Infill percentage: 15%
Infill pattern: Gyroid
Support type: Cura Normal Supports
Support interface pattern: Grid
Build plate adhesion: Raft on all pieces for adhesion