Monst3r 3inch fpv freestyle drone frame sub250g

3inch freestyle drone frame - the mini monst3r

Build your own sub250g drone.

You can 3Dprint it or mill in carbon (see pictures)

The camera-brace can be 3Dprinted or milled in aluminum.

The parts for the camera damping should be printed in TPU. You can choose between the 19mm or the 20mm version.

There is also an adapter for cameras with 14mm. You should choose the 19mm TPU part as cameradamper if you use the adapter.

mounts for fc and esc: 20x20mm or 25x25mm in the front and 25x25mm in the back.

mounts for motors: 9x9mm

suggested motors: 1404 or 1405 with 4500kV

You can use 3dprinted standoffs but I suggest 25mm standoffs from aluminum

What do you need to print:

1x lower deck

1x upper deck

2x arm left

2x arm right

1x lower brace

2x front brace (one of them mirrored)

4x arm_protector

1x front bumper

2x camrubber (for 19mm or 20mm cam width)

1x cam adapter (if you use a 14mm cam)

2x standoff (not included - 3dprinted or use 25mm standoff from aluminium)

depending on the srews you like to use you maybe need to drill out the holes.

for carbon I used 4mm for the arms and 1,5mm for the lower and upper deck.

question, suggestions or if you want me to do a built tutorial - let me know.

have fun - it's a beast and very rubust.

drone parts printed in ASA or better: carbon strengthened material

camdampers, armprotector and bumpers printed in TPU

all 100% infill