Google Nest Doorbell Gen 2 Wired Mount. 45 Degrees To Get The Perfect View. Our Nest Doorbell Gen 2 Mount 45 Degrees Aims Your Doorbell Perfectly

Our Google Nest Doorbell Wired (Gen 2) mount allows you to mount your Nest Hello aimed 45 degrees away from the mounting surface. Aims either left or right.

Great for changing the viewing angle to across the door and down a hall rather than straight out from the door.

Approximate dimensions are 4.6" x 1" x .7".

Compatible with Google Nest Hello Doorbell Wired Gen 2.

NOT compatible with Nest Hello Battery model - see our other listings for this model!

Suitable for indoor / outdoor use in all weather and climate.

Can be pointed left or right.

Model shown in picture is 75 degrees. This model is for a 45 degree angle.

Colors shown are white, black, gray, translucent, silver medium and gold dark.

Installation

Secure mounting plate included in box to mount using two #6 x 3/4in wood screws.

Position at about chest level for best view frame.

Screw into mounting surface with appropriate screw for the surface you intend to mount on (ex. wood screws for wood trim, masonry for brick etc..)

Mount Google Nest Doorbell Wired Gen 2 to bracket by placing over mounting plate and tightening top screw.

Need Something Different?

Don't see the wedge angle you're looking for?

Check our other listings for additional angles and types of doorbells.

Need it printed? Just visit our website!

Suggested Slicing Tool: PrusaSlicer

Suggested nozzle diameter: 0.6mm, 0.4mm

Suggested printer settings: 0.2mm Quality or 0.3mm Draft

Suggested Infill Percentage: 10%

Suggested Infill Pattern: Grid

Suggested Filament Brand: Prusament or Overture

Supports Needed: No

Print Time: ~2hr