Shield Rack for 1/144 Scale Zaku II

The 2022 Zaku II Revive comes with a cool accessory to mount most of your weapon that is available in the kit. However it doesn't fit straight out of the box because said accessory was apparently made for the High-Maneuver Zaku II that has narrower shield. In theory you could sand it down to size, but you can also print new ones to turn all of your Zaku into a walking, towering armory.

Weapons that could be mounted are : 1 Zaku Machine Gun, 1 Heat Axe, 1 Bazooka & 1 Giant Bazooka. The racks are modeled 0.15mm apart from the shield and can be held in place simply by friction. Part with "Loose" in its name is 0.5mm apart in its inner hole and is intended to be safer for painted kit. Measurements in file name refers to the model shield size rounded. Compatible models are the following :
- 15x4mm : HG Zaku II F2
- 16x4mm : HG Origin Zaku II
- 17x4mm : HG Zaku II Revive
- 19x3mm : HG Zaku II FZ
- 20x4mm : HG Geara Zulu

Feel free to remix if you want to use it on other gunplas.

Changelog : 13/03/24 - Added more object that accomodates different Zakus, reuploaded old ones with more accurate measurement, changed file description

Dimension : 32mm x 17mm x 5mm
Weight : 1 gram

FDM Printer
Resolution : 0.4mm line width x 0.2 layer
Infill : 15%
Orientation : Printed flat with hollowed area facing up
Support : Yes for pegs
Printing Time : +10 minutes

MSLA Printer
Resolution : 0.1mm layer height or finer
Orientation : Arctan of layer height used divided by printer XY resolution
Support : Yes
Printing Time : +10 minutes