Legends scale Sky Lynx Upgrade

I am a beginner and this is my second 3D model design.

It is based on a existing 3D print model of Majayrick:
Please see his awesum 3D model

https://www.thingiverse.com/thing:5212670

You can download that version and just replace the head mouth and wings with my version.

I made an
-Custom head with mouth gun
-Extra wing

The mouth has an G1 stylish mouth gun. I made 2 versions
-Single barrel gun
-Dual barrel gun

I added some teeth in the mouth
The head has a G1 stylish flip cab in the neck to represent the G1
skylynx look.
The wing is an add on.

The joints of the wing and neck cab can be done with filament rivets.
Holes are present, but smaller. Please drill this accordingly to filament diameter.

• Drill diameter 1.7/1.8mm
• Cutter or sand paper for tolerance adjustment
• You could glue 1 side of the rivets so it stays in place. Or make a flat top (with an lighter) for 1 side and push it in to a tighter hole to hold the wings / cap.

In the pictures you can see the comparison of the legends scale printed original and next to it 145% scaled with my upgrades
Remark:
The customs are the same scale as the original designer.

Please comment or let me know how you like it.

Slicer Cura
Print orientation: accordingly my best, please try otherwise
Filament PLA/PLA+/PETG