League of Legends - Miss Fortune (Battle Bunny) Pistol

This model is designed for Miss Fortune - Battle Bunny skin cosplay from League of Legends.

It comes with 2 main parts, the bunny at the pistol.

There are pictures with parts labeled with their file names and some assembly guide that you can refer to.

This model is designed for NO other purpose than a basic cosplay prop or decoration.

The bunny is divided into two parts to fit in a printer with a platform size of 200mm x 200mm x 200mm. I decided not to slice it into half for easier printing to preserve the feature of the bunny. However, if you find it difficult to print them with support, you can slice them into half for a flat face that can lay on the printing bed using Netfabb.

The head and the body are connected using a built-in 10mm peg. You may want to orient the model to a position where the support is not applied on the hole to retain the dimension as much as possible. If it is hard to fit in the hole, you can either sand the hole or the peg for a better fit. You can choose to remove the peg completely and glue the head directly onto the body too.

The pistol is divided into two parts. They are then sliced into half for a flat face that can lay on the printing bed easily. There is a cut out on part 1 that can use to house part 2. Therefore, please remove the support from the cut-out as cleanly as possible for a better fit.

There are multiple cut out on the pistol as a guide to place the bunny.

I also include the uncut version just in case you need it.

You will need to make two copies to complete the prop.

For scaling, please use the same scale for all the parts. This model is designed based on a model with a height of around 155cm. You can use this as a reference for your scale.

Cheers and Happy Printing!

Dimension: 313.55mm x 313.55mm x 99.47mm