"Golden Pipe" Gold wash channel / "Golden Pipe" Gold sluice

The "Golden Pipe" gold panning flume is an underwater gold panning flume that allows you to pan for gold even in deeper and more turbulent water.

Simply push the upper part and the lower part together, place the gold panning chute about 2/4 or 3/4 of the height of the upper riffle in the water, and then just shovel your material into it without having to prescreen it.

The heavy material settles in the collection box where it is swirled up again by the water flowing through the pipes and carried forward, depositing the heavy material (gold) in the riffles and flushing the lighter material out the front again.

You'll need the following bolts, nuts and washers:

20 times M4 x 16mm countersunk screws

20 times M4 nuts

40 times M4 washers

The "Golden Pipe" gold sluice is an underwater gold sluice that allows you to pan for gold in deeper and more turbulent water.

Simply push the upper and lower parts together, place the gold sluice in the water about 2/4 or 3/4 the height of the upper ripple and then simply shovel your material in without having to pre-screen it.

The heavy material settles in the collection box and is whirled up again by the water flowing through the pipes and carried forward, with the heavy material (gold) settling in the corrugations and the lighter material being flushed out again at the front.

You need the following screws, nuts and washers:

20 times M4 x 16mm countersunk screws

20 times M4 nuts

40 times M4 washers

0.3mm layer height / Support