3D Printer Spare Parts Storage - Bambu, Harley, and Ender Logos

If you like this design, Please click "LIKE". Thanks

I do custom logos if you want your business logo on the sides.

This design is a Work-In-Progress as I am still adding more components and cabinets with other logos. I designed this storage cabinet to be spacious enough to house all your smaller spare parts for your 3D printer.

The bottom drawer is 60mm tall and the other 3 drawers are 40mm tall. There are numerous sizes of the drawer inlays to mix and match the drawer layouts to achieve the setup you need. I have included plain drawers as well as drawers with grids. The inlays come in two depths, 26mm and 52 mm and are stackable in the bottom drawer. The drawers have a grid pattern to hold the drawers in place. I have also included drawers without the grid pattern if you need that.

Some .STEP files will also be included here.

How to read the file descriptions:
1x1-26 Inlay: 1 wide x1 deep grid size, 26 mm tall, No label;
1x2-26 Hotend Inlay: 1 wide x 2 deep grid size, 26 mm tall, Labeled "Hotend"
2x2-52 Inlay: 2 wide x 2 deep grid size, 52 mm tall

If you print more than 1 cabinet there is a spot in the top that can be punched or drilled out to bolt them together.

P.S. If you have made this purchase and you have a request, feel free to contact me to submit the request.

Thanks for your continued support!

Finished Size: 210 width x 210 depth x 190 height
Printing Orientation:
Cabinet - on its back with No Supports
Drawers - bottom down - Supports
Inlays - bottom down - Supports
Handles - top down No Supports

Recommended Printer Settings:
Infill - 10% cubic or 5% Gyroid
Material - Any

Parts:
Fasteners Needed: 8 - M4x10 or 12mm
Feet: Any rubber screw on feet will work if you want feet. Here is an example (https://www.amazon.com/dp/B08PCF9VQ1?ref=ppx_yo2ov_dt_b_product_details&th=1)

https://youtu.be/0XsCmv9DlRk