BUTTERFLY COMB KNIFE

Butterfly Razor with Comb Utility designed for 3D printing! This cutting-edge design combines the classic essence of a butterfly razor with the versatility of a comb in a unique creation that you can 3D print from the comfort of your home.

3D printing gives you the freedom to choose your material and style, allowing you to customize your Butterfly Razor with Comb Utility to perfectly suit your tastes and needs.

Material: It is recommended to use a strong and durable material, such as PLA.

Layer Height: A layer height value of about 0.2-0.3 mm is adequate to achieve a good balance between printing speed and finishing quality.

Infill: 20-30% infill will be sufficient to keep the internal structure robust while saving material.

Print speed: The recommended print speed can be in the range of 40-60 mm/s. However, please note that the specific values may vary depending on your 3D printer.

Extrusion temperature: The extrusion temperature will depend on the material you choose. For example, for PLA, you can set an extrusion temperature of approximately 200-220°C.

Hot bed temperature: If you are using PLA, a bed temperature of 65°C should be sufficient.

Supports (Supports): Apply supports for printing the comb

Post-processing: Once the print is complete, you may want to sand and polish the surfaces for a smooth, professional finish. Also, verify that the moving parts of the butterfly knife operate smoothly.

Remember that these values are general suggestions and may need specific adjustments depending on your 3D printer and printing conditions. It is always advisable to perform some test prints before printing the final product to ensure you get the best results.