"Golden Pot" Gold Concentrator

The "Golden Pot" gold concentrator is designed to quickly classify and then leach gold-bearing material.

Step 1: Screw the lower pot to the upper funnel.

Step 2: Fill upper funnel 3/4 full with material and sufficient water

Step 3: If needed, screw the top lid onto the funnel.

Step 4: Put full pot into holder if needed and then shake well (can also be shaken without holder).

Step 5: Unscrew pot

Step 6: Unscrew lid from hopper and tip material out of hopper.

Repeat steps 1-6 until the pot is full and then transfer to a gold wash pan or screw the pot lid onto the pot and wash out at home at your leisure.

The holder requires 2 M4 x 16mm bolts, 2 M4 nuts and 2 M4 washers.

The "Golden Pot" gold concentrator is designed to rapidly classify and then leach out gold bearing material.

Step 1: Screw the lower pot to the upper funnel

Step 2: Fill the upper funnel 3/4 full with material and enough water

Step 3: If necessary, screw the top lid onto the funnel.

Step 4: If necessary, put the complete pot in the holder and then shake well (can also be shaken without the holder).

Step 5: Unscrew the pot

Step 6: Unscrew the lid from the hopper and tip material out of the hopper.

Repeat steps 1-6 until the pot is full and then put it in a gold pan or screw the pot lid onto the pot and wash it out at home.

2 M4 x 16mm screws, 2 M4 nuts and 2 M4 washers are required for the holder.

0.3mm layer height / Support