DnD terrain rollers – Roofs and Coverings
$5.00 DnD terrain rollers – Roofs and Coverings
3D
Published 2023-08-23T08:32:57+00:00
These digital 3D printable models of Stamp Rollers are meant to be used to create patterns of various ground terrains for Dungeon and Dragons! They can be used on modeling putty, clay, or XPS polystyrene. The rollers are 15 cm high and the length of the pattern is 10 cm (6×4 squares, each 2.5 cm).
The download contains 10 original texture rollers (STL) ready to be 3D printed and 1 bonus free roller.
SIZE
At 100% scale, the large roller’s dimensions are approximately:
Width 30 mm
Length 30 mm
Height 150 mm
You can scale the model as you wish, but we can’t guarantee that the model will print well at a much smaller size.
3D PRINTING SETTINGS
The rollers are designed to perform the best when printed on SLA printers, but you can print them on FDM as well.
If you decide to print on FDM, use these settings:
– Layer height 0.15 mm
– Infill 0%
– Outer perimeters: 0.35 mm
– Retractions: off
Printing settings will vary greatly depending on your specific printer.
Do you like the model and don’t have a 3D printer? You can purchase the already printed rollers at RPG Forge studio.
These models were brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here.
| Date published | 23/08/2023 |
| Price | $5.00 |
| Support Free | YES |