[Tabletop Minis - FREE & presupported] BACK PLAQUES Addon Pack for Space Knight Bondsman

Addon package of multiple cosmetic plaques to further customize the Imperial Space Knight - Bondsman with honoring titles. See below link for main page:
Bondsman - link

All models come in both configurations of pre-supported and unsupported. Pack includes:

1. Back Plaque - "Close Hell"
2. Back Plaque - "Invincible Knight"
3. Back Plaque - "Reforged"
4. Back Plaque - "Machinery Cult Fanboy" :D

Plaques are optional, but add some personality to each Bondsman knight. See pictures for placement tips.

I have personally printed multiple configurations on my own printer for use in my own army using the Saturn 3 12k

I would not recommend using an FDM (spool filament) printer for making these models, but would be very interested in seeing a result from a maker who has done so!

Chitubox settings I used to print the pictured models:
Layer Height = 0.05mm
Bottom Layer Count: 6
Exposure Time: 2.1s (will vary from printer to printer, perform a benchmark test)
Bottom Exposure Time: 40s
Rest Times: 0s
Lift Distance: 5.00mm
Bottom Lift Speed: 40mm/min
Lift Speed: 50mm/min
Retract Speed: 180mm/min
\
Models were made with Anycubic brand gray photocure UV resin in an Elegoo Saturn 3.
\

That said, all printers have their quirks, and I cannot guarantee pre-supported files will work immediately for you. I recommend ChituBox for slicing software if you would like to add your own supports to these models.