Felix's Aegis Shield Relic

Dangerous Ladies' 3D model for Felix's Aegis Shield Hero Relic
Model by Jennifer Rezny (@quicksparrows)

.stl format.

Pre-sliced for printing on both a 200x200x200, and 200x200x300mm printer, but I have included a whole version for those who might want to slice it themselves. The whole version does not have internal channels so you can design your own as well.

The shield is approx. 30" tall, which is to scale with Felix, who is 5'9". You can print all of the pieces at 76% scale to drop it to 22.8" and use a 3/8" square dowel for the middle instead of a 1/2" one. Please keep in mind that the shield is designed to be big; if you scale it too small, the handle on the back will not fit your hand.

We have included 3D models for the small pegs, but you can skip printing them and use doweling cut into 1" segments instead to save print hours and have stronger pegs.

FOR 200 MM FILES:
1/2" square dowel - 28.5" long (main body/center core)
1/2" square dowel - 2" long (top piece)
1/2" round dowel - 1" long (alignment) x12
1/4" round dowels - 1" long (alignment) x18

FOR 300 MM FILES:
1/2" square dowel - 27.5" long (main body/center core)
1/2" square dowel - 1" long (alignment) x6
1/4" round dowels - 1" long (x14)

Files include:
- Reference images
- .stl files

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies