HDR50 | TR50 Bodykit Riflekit Assault Rifle

Body kit for the UMAREX T4E HDR50 | TR50 Homedefence & Paintball Revolver.

STL file for the Umarex HDR50 | TR50. assault rifle. For your own 3D printing.

You will receive STL files for 3D printing with your purchase. You can decide for yourself in which resolution, color etc. you want to print it. Absolute eye-catcher for the Umarex HDR50 | TR50. The large printed components are glued and screwed together. The corresponding screws are listed in the screenshots. An aluminum tube OD=18mm ID=14mm serves as the barrel of the body kit. This can easily be purchased on eBay, for example. It should have a minimum length of 295mm. Of course it can also be longer. The aluminum tube is then also glued into the body kit.

The HDR50 is pushed into the rifle kit from below with a very precise fit, the flaps are positioned on the left and right and screwed in place. The Picatinny rails and the individual parts of the buttstock are screwed and glued together.

If you have installed a tuning barrel that protrudes slightly from the HDR50 | TR50 (M15x1), this will also fit into the body kit.

The rifle kit has a barrel diameter of approx. 14mm. The rifle kit is therefore not a tuning, but only an optical upgrade.

We designed the rifle kit ourselves over a long period of time.

We are therefore happy to answer any questions you may have.

This offer here applies to the corresponding STL files of the Rifle kit. These files may only be used for private purposes.

Layer up to 0.3mm height. Infill min. 20%.