Gar Saxon Helmet/ Darth Maul Mandalorian Helmet Mix

Hello Fellow 3D Printing and Star Wars fans!

This is my Gar Saxon helmet from the clone wars, when Darth Maul ruled mandalore and Gar modified his helmet to look like Maul!

Horns can be printed separately and snap on the helmet.

Lines are visible on the actual print to help you with painting, but they're very thin so they're easy to cover up in case you want to draw your own in a different way. Therefore you're not limited.

Full helmet, cut in half, cut in 4 and cut in 8 pieces options available for all printer sizes.

By default, the Cults - Private Use license is applied. This means that the 3D models under this licence are reserved exclusively for private use:

You can print them at home for your personal use;
You may not modify or adapt the digital files of the 3D models and share them;
You may not sell the digital files of the 3D models;
You may not sell the 3D prints of the designs or any 3D prints derived from the designs for economic or financial gain.

0.2 layer height with 0.08 top for the smoothness
1.2 top/bottom thickness
2-3 walls and 5% infill (the top part is mostly solid anyway if you use 1.2 top/bottom thickness)
You can try wall order "infill,inner,outer" for best outside surface, ive been told it helps a lot.

Printed on Bambu PLA on the P1P with standard speeds.

Best print orientations along with general helmet printing tips are in the pdf guide in the zip file.