DEMON SLAYER - TANJIRO KEYCHAIN/KEY CHAIN

Tanjiro keychain. The file consists of several STLs for printing.

The keychain captures the essence of the Demon Slayer character with amazing accuracy, both facial features and clothing.

To print it we must do it downwards, or also, we can print it upwards.

The color STLs have a layer height of 0.3 mm, while the base has a height of 3.7 mm, resulting in a 4 mm thick keychain. It is recommended to print the base in white, so as not to dull the colors, and to achieve a good finish.

Each STL has a number, which marks the order in which they were printed during the tests.

1Black

2White

3Leather

4Grey

5Green

6Brown

7Red

8Base

For any inquiries please feel free to contact us on Instagram.

NOVA PRINT 3D

@novaprint3d.ar

Tanjiro Keychain. The file consists of several STL files for printing.

The keychain captures the essence of the Demon Slayer character with astonishing precision, both in facial features and attire.

To print it, you can either print it facing downwards or upwards.

The colored STL files have a layer height of 0.3 mm, while the base has a height of 3.7 mm, resulting in a final keychain thickness of 4 mm. It is recommended to print the base in white to avoid overshadowing the colors and achieve a good finish.

Each STL file is labeled with a number, indicating the order in which they were printed during testing.

1 Black

2 White

3 Skin

4 Gray

5 Green

6 Brown

7 Red

8 Base

For any inquiries, please don't hesitate to contact us on Instagram.

NOVA PRINT 3D

@novaprint3d.ar

PRUSASLICER PARAMETERS:

Layer height: 0,3

Initial Layer Height: 0,3

Wall Line Count (Perimeter): 1

Backfill: 20%

Filling hilbert curve 10%

PARAMETERS CURE:

Layer height: 0,3

Initial Layer Height: 0,3

Wall Line Count (Perimeter): 1

Backfill: 20%

IMPORTANT:

USE IN BOTH SLICER Z-JUMP FOR COLORS.

FOR PRINTING THE M600 COMMAND WAS USED