BLEACH AARONIERO (NOVENO 9TH ESPADA) ARTICULATED MASK

🧥 Model: Aaroniero Arruruerie Full Face Articulated Mask from anime Bleach
🎴 Dimensions: 189.94 x 150.86 x 116.70 mm
🎱 Mounts: 3 versions for Elastic Band and 3 for Ropes (Articulated_Mounts.rar)
🧧 More in Collection: https://cults3d.com/en/design-collections/Steamson/bleach-espada
💬 Если вы из стран СНГ, то можете приобрести эту работу на Ярмарке Мастеров: https://bit.ly/livemaster-baamstl

🧵 CONNECTIONS:
1. To open and close the jaw, it is necessary to connect the fasteners with stationery gum (the tension depends on how close and how many holes the gum connects). Example at the photo in the gallery
2. The lower jaw must slide with the elastic band on the lower attachment. You can also see it in the photo in the gallery
3. In this case, *-Ropes.stl attachments (from Articulated_Mounts.rar) may be more convenient
4. You can connect the jaws in the hinge area using the Holder.stl included in the kit or using a bolt with a washer, as at the example in the gallery

🚨 Wear Guide: https://bit.ly/3bDG3Op (Google Drive) - in this version of the mask, you can not use the tensioner on the neck as in the guide, but if the mask slips, it is better to leave it. In my case, only elastic bands were needed for the head and under the jaw
🧰 Size Select Tool: https://cults3d.com/en/3d-model/various/mask-size-9324ba64abe6967d7e14

💊 SIZE SCALES (you need this to scale the mask in right way and choose a mount for it):
L = 100%, M = 87%, S = 74%

🎲 Please use the settings I tested below (show FDM setting, but you can use SLA too):

================= LICENCE =================

🃏 This is BASIC LICENSE for PERSONAL USE only - Do not copy, redistribute work or sell the 2D/3D printed without the express permission from me

🀄 With the EXTENDED LICENSE for COMMERCIAL USE - Please contact me via any possible ways in profile (IG/TT/EM): https://cults3d.com/en/users/Steamson/creations)

Material: ABS (or another with one condition - rigidity)
Layer Height: 0.1-0.2mm
Line Width: 0.4 (depends on your nozzle)
Wall Thickness: 1.2 (or thicker)
Supports: Yes