Stylish Vorolamp

Create this visually appealing design piece
Illuminate your space with a touch of elegance! Introducing a decorative lamp that adds a captivating twist to your room. The secret lies in its translucent shade, creating a mesmerizing visual effect that's a treat for the eyes. Ideal for those cozy, dark evenings when you want to set the perfect mood.

This artistic lamp was meticulously brought to life using an MSLA 3D printer. While some edges may require supports. The FDM printer is also applicaple.

To assemble, you'll need the Rabalux Bowie 6570 or 6569 lamp fixture:
https://rabalux.com/6570-bowie

For lighting i recommend the LEDVANCE AC34820 FILAMENT CLASSIC A30 E27 MULTICOLOR bulb:
https://www.ledvance.com/en/product-datasheet/177779/154405

If you opt for a different lamp or bulb please consider the dimensions provided in the attached cutting scheme. However, for the best results and safety LED bulbs are optimal. They emit significantly less heat than traditional tungsten bulbs, making them ideal for close proximity to the printed design.

The LEDVANCE bulb i recommend even has Wi-Fi connectivity. You can adjust its brightness through a mobile app, creating the perfect atmosphere for any occasion. Just 1% of its power can set a soothing nighttime ambiance. At around 10% power, the bulb's filament becomes clearly visible through the shade, adding an extra layer of intrigue.

The lamp itself is compatible with an centering platefor optimal shade positioning. You'll also find a model of the bulb with the lamp in the package, so make sure your lamp's dimensions match the model.

The shade's walls are just 2.5mm from the bulb's surface, so the centering plater ensures perfect alignment. The LED bulb generates a surface temperature of only around 50°C, well within the tolerance of most resin printers, even with lower-quality resins.

The shade's close proximity to the bulb creates an enchanting interplay of light and shadow, enhancing your space's ambiance. While the lamp is safe to use, never leave it unattended. Always opt for LED bulbs and never use tungsten ones.

To avoid exposing uncured resin fumes in your room, place the shade on the bulb only when the print is fully cured.

Now, go ahead and bring this exquisite design to life and light up with style!"

#LAMPSXCULTS

3D Resin Printer: Creality Halot Mage Pro 8K
Slicer: Halot Box
Resin: Anycubic Water-Wash Resin - White
Printing Parameters:
Layer Thickness: 0.05mm
Initial Exposure: 25s
Exposure Time: 2.5s
Rising Height: 8mm
Motor Speed: 6mm/s
Light-off Delay: 1s
Bottom Layer Count: 3