Skip to content

Dice Masters Set - 14 Shapes - Amarante Font - Supports Included

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 1.7k views
  • 6 likes
  • 2 downloads
  • 1 collection
License
3D design format
STL Folder details Close
  • Bumpers_D10-Pointier-Balanced-AvgNormal-Sharp-Amarante.stl
  • Bumpers_D10-Standard-Balanced-AvgNormal-Sharp-Amarante.stl
  • Bumpers_D12-Rhombus-AvgNormal-Sharp-Amarante.stl
  • Bumpers_D12-Standard-Balanced-AvgNormal-Sharp-Amarante.stl
  • Bumpers_D20-Standard-Balanced-AvgNormal-Sharp-Amarante.stl
  • Bumpers_D4-Crystal-AvgNormal-Sharp-Amarante.stl
  • Bumpers_D4-GemShard-AvgNormal-Sharp-Amarante.stl
  • Bumpers_D4-StdPyramid-AvgNormal-Sharp-Amarante.stl
  • Bumpers_D6-Rhombus-AvgNormal-Sharp-Amarante.stl
  • Bumpers_D6-StdCube-AvgNormal-Sharp-Amarante.stl
  • Bumpers_D8-Pointier-Balanced-AvgNormal-Sharp-Amarante.stl
  • Bumpers_D8-Standard-AvgNormal-Sharp-Amarante.stl
  • Bumpers_DPER-Pointier-Balanced-AvgNormal-Sharp-Amarante.stl
  • Bumpers_DPER-Standard-Balanced-AvgNormal-Sharp-Amarante.stl
  • D10-Pointier-Balanced-AvgNormal-Sharp-Amarante.stl
  • D10-Standard-Balanced-AvgNormal-Sharp-Amarante.stl
  • D12-Rhombus-AvgNormal-Sharp-Amarante.stl
  • D12-Standard-Balanced-AvgNormal-Sharp-Amarante.stl
  • D20-Standard-Balanced-AvgNormal-Sharp-Amarante.stl
  • D4-Crystal-AvgNormal-Sharp-Amarante.stl
  • D4-GemShard-AvgNormal-Sharp-Amarante.stl
  • D4-StdPyramid-AvgNormal-Sharp-Amarante.stl
  • D6-Rhombus-AvgNormal-Sharp-Amarante.stl
  • D6-StdCube-AvgNormal-Sharp-Amarante.stl
  • D8-Pointier-Balanced-AvgNormal-Sharp-Amarante.stl
  • D8-Standard-AvgNormal-Sharp-Amarante.stl
  • DPER-Pointier-Balanced-AvgNormal-Sharp-Amarante.stl
  • DPER-Standard-Balanced-AvgNormal-Sharp-Amarante.stl
  • Supported_D10-Pointier-Balanced-AvgNormal-Sharp-Amarante.stl
  • Supported_D10-Standard-Balanced-AvgNormal-Sharp-Amarante.stl
  • Supported_D12-Rhombus-AvgNormal-Sharp-Amarante.stl
  • Supported_D12-Standard-Balanced-AvgNormal-Sharp-Amarante.stl
  • Supported_D20-Standard-Balanced-AvgNormal-Sharp-Amarante.stl
  • Supported_D4-Crystal-AvgNormal-Sharp-Amarante.stl
  • Supported_D4-GemShard-AvgNormal-Sharp-Amarante.stl
  • Supported_D4-StdPyramid-AvgNormal-Sharp-Amarante.stl
  • Supported_D6-Rhombus-AvgNormal-Sharp-Amarante.stl
  • Supported_D6-StdCube-AvgNormal-Sharp-Amarante.stl
  • Supported_D8-Pointier-Balanced-AvgNormal-Sharp-Amarante.stl
  • Supported_D8-Standard-AvgNormal-Sharp-Amarante.stl
  • Supported_DPER-Pointier-Balanced-AvgNormal-Sharp-Amarante.stl
  • Supported_DPER-Standard-Balanced-AvgNormal-Sharp-Amarante.stl

Learn more about the formats
Publication date 2023-04-02 at 16:30
Design number 1147909
TheArgentRose

TheArgentRose

3D printer file info

3D model description

This set of sharp-edged dice is perfect for 3d printing your own dice masters. Sand and polish them, and use them to make silicone molds so you can cast your own finished dice for tabletop roleplaying.

The font used is Amarante, which can be used for commercial use. The files are scaled to an average/normal size for dice and will fit well with most of the big-name sets you already have in your dice collection. This set uses a Balanced numbering layout, which is numerically superior to the Standard number layout.

14 Shapes, 42 Total Files, Supports Included

There are a variety of shapes included with this set, so you can mix-and-match to build the perfect set:

  • D4: Standard Pyramid, Crystal, Gem/Shard
  • D6: Standard Cube, Rhombus
  • D8: Standard and Pointier
  • D10: Standard and Pointier
  • DPER: Standard and Pointier
  • D12: Standard and Rhombus
  • D20: Standard

This set includes STLs for the raw, sharp-edged dice, versions of the same dice STLs with bumpers added, as well as pre-supported, ready-to-print STLs, for a total of 42 STL files.

The bumpers are meant to help with printing, preventing the supports on the edges from chipping the dice and ensuring greater dimensional stability with less distortion. After printing and removing the supports, these sand off easily using 1200 grit wet sandpaper.

The supports setup on the presupported files is carefully calibrated to print dice masters as perfectly as possible - make sure you calibrate your exposure settings before printing, for best results. An 8 page PDF is also included which includes printing and calibration instructions as well as tips on removing supports and sanding and polishing your prints.

Usage of the Files:

These files are supplied to print your own dice masters, so you may upload them to a printing service such as Shapeways as a privately viewable object to have them printed for you, or send them to someone you know who owns a resin printer who will print them for you, or similar transfer of files to get them printed up for you. You are not allowed to redistribute the STL files otherwise.

You can print as many copies of your masters as you need from these STL files, and you may modify the files as needed, but you may not redistribute any of those modified files except to have them printed for you as detailed above.

For commercial use:
- You can sell silicone molds made from these, for the purposes of others casting dice in them.
- You can sell resin dice cast from molds based on the prints of these files (if you may do so in your country - certain types of dice may be patented for sale as gaming devices in certain countries - my files are 3D models of dice rather than gaming devices themselves).
- You may NOT sell the 3D prints of these files - I sell the physical 3D printed masters myself exclusively.
- Crediting me is not necessary, but always appreciated.
- Any other usage, please contact me first.

3D printing settings

Requires a resin 3D printer - not suitable for FDM printing.

Many resins are suitable for dice printing, but some may tend to distort (causing certain dice like the D6 to be visibly skewed), or provide only "mushy" detail on lower faces, with numbers on overhangs filling in where they shouldn't. Some resins may need extreme post-curing, time to off-gas, or coating with products such as Inhibit-X. Siraya Tech Blu and Ameralabs AMD-3 LED tend to capture detail very well and are particularly recommended.

Perfect exposure calibration is key to success with dice printing. Instructions are included in the 8-page PDF on how to print the Ameralabs Town test object and calibrate your exposure settings for dice printing (tl;dr - err on the side of under-exposure).

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.